Setting A Programme; Adjusting The Programme Settings; Loading Laundry; Using A Measuring Aid For Liquid Detergent - Siemens WM14XMH0EU User Manual And Installation Instruction

Hide thumbs Also See for WM14XMH0EU:
Table of Contents

Advertisement

Note: The drum is lit up after the
door is opened and closed and once
the programme has started. The light
goes out automatically.
13.2 Setting a programme
Set the programme selector to the
1.
required programme.
→ "Programmes", Page 26
If necessary, adjust the pro-
2.
gramme settings → Page 39.
13.3 Adjusting the pro-
gramme settings
Requirement: A programme has
been set.
→ "Setting a programme", Page 39
Adjust the programme settings.
→ "Programmes", Page 26
Note: The programme settings are
not saved permanently for the pro-
gramme.
13.4 Loading laundry
Notes
¡ Please read the information in the
Safety → Page 4 and Preventing
material damage → Page 10 sec-
tions to ensure that you use the
appliance safely.
¡ To prevent creasing, take note of
the maximum load for the
→ "Programmes", Page 26.
Requirement: The laundry is pre-
pared and sorted.
→ "Laundry", Page 35
Open the door.
1.
Make sure that the drum is empty.
Load the laundry unfolded into the
2.
drum.
Close the door.
3.
Ensure that there is no laundry
trapped in the door.
13.5 Using a measuring aid
for liquid detergent
If you order the measuring aid as an
accessory, you must use the measur-
ing aid.
Pull out the detergent drawer.
1.
Basic operation en
39

Advertisement

Table of Contents
loading

Table of Contents