Download Print this page
Brizo Charlotte 68485-BNLHP Manual

Brizo Charlotte 68485-BNLHP Manual

Two handle widespread bidet faucets with integral vacuum breaker-less handles

Advertisement

Quick Links

U P
®
C
®
ASME A112.18.1 / CSA B125.1
Model/Modelo/Modèle
68485-sLHP
Series/Series/Seria
Charlotte™
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
You may need / Usted puede necesitar / Articles dont vous pouvez avoir besoin:
For easy installation of your
Brizo
faucet you will need:
®
• To READ ALL the instructions completely
before beginning.
• To READ ALL warnings, care, and maintenance
information.
• To purchase the correct water supply hook-up.
Para instalación fácil de su llave
Brizo
usted necesitará:
®
• LEER TODAS las instrucciones completamente
antes de empezar.
• LEER TODOS los avisos, cuidados, e
información de mantenimiento.
• Comprar las conexiones correctas para el
suministro de agua.
Pour installer votre robinet
Brizo
®
facilement, vous devez:
• LIRE TOUTES les instructions avant
de débuter;
• LIRE TOUS les avertissements ainsi que toutes
les instructions de nettoyage et d'entretien;
• Acheter le bon nécessaire de raccordement.
TWO HANDLE WIDESPREAD BIDET FAUCETS
WITH INTEGRAL VACUUM BREAKER - LESS HANDLES
LLAVES DE AGUA DE PIEZAS SEPARADAS, DE
DOS MANIJAS, PARA BIDETS CON EL TRITURADOR
INTEGRAL DEL VACÍO - SIN MANIJAS
ROBINETS À GRAND ENTRAXE ET À DEUX MANETTES
POUR BIDET AVEC LE BRISEUR INTÉGRAL DE VIDE -
SANS LES MANETTES
sSpecify Finish / Especifíque el Acabado / Précisez le Fini
1
Note: Handle kits must be
ordered separately.
Nota: los juegos de manijas se
venden por separado.
Note : Manettes en kit vendues
séparément.
L
L
4/19/11
Rev. A

Advertisement

loading

Summary of Contents for Brizo Charlotte 68485-BNLHP

  • Page 1 Inscrivez le numéro de modèle ici. séparément. You may need / Usted puede necesitar / Articles dont vous pouvez avoir besoin: For easy installation of your Brizo faucet you will need: ® • To READ ALL the instructions completely before beginning.
  • Page 2 This warranty excludes all industrial, commercial & business usage, whose purchasers are parts may be obtained by calling 1-877-345-BRIZO (2749) (in the U.S. and Canada) or by hereby extended a five year limited warranty from the date of purchase, with all other terms of writing to: this warranty applying except the duration of the warranty.
  • Page 3 3 mm OPERATING INSTRUCTIONS MAINTENANCE A. Check to be sure diverter valve handle (1) is in the rim feed position SHUT OFF WATER SUPPLIES BEFORE SERVICING VALVE ASSEMBLIES. (turned fully clockwise). If your bidet faucet leaks out of rim feed area, or from rosette sprayer, or B.
  • Page 4 RP26853 Allen Wrench Llave Allen Clé Allen RP63514s Diverter Handle & Set Screw HL5385s Manija Desviadora y Lever Handle & Body, (Pair) Tornillo de Ajuste Palanca y Cuerpo, Lado Caliente Manette d’inverseur Manette et corps, eau chaude et vis de calage RP48448s Diverter Body Cuerpo Desviador...
  • Page 5 2 mm INSTALLATION OF DIVERTER VALVE/VACUUM BREAKER Note: Please refer to bidet bowl installation instructions to identify hole location for diverter valve. INSTALLATION OF ROSETTE SPRAY Hole size must be 1-1/8” diameter minimum. Apply silicone bead (1) under rosette (2). Insert Connect diverter valve (1) with “Y”...
  • Page 6 INSTALLATION OF VALVE ASSEMBLIES & TRIM by turning body portion clockwise. Tighten by hand only. Repeat steps A & B Note: Holes for valves must be 1-1/8" diameter minimum and must be at least 5" apart. for other valve. Look for a blue label or dot on cold valve assembly and red label or dot on hot valve If handles do not align, unscrew one or both handle &...
  • Page 7 Step 3b POP-UP INSTALLATION Remove pivot nut (1). Install horizontal rod Apply silicone to underside of flange (1). Insert Step 3c Remove stopper (1) and flange (2). (2) and stopper (3) as removable (4) or non- body (2) into sink. Screw flange (1) into body (2). removable (5).
  • Page 8 1/2" (12.7 mm) MAKE CONNECTIONS TO WATER LINES: FLUSH YOUR SYSTEM Connect inlet hoses (1) to hot and cold valve inlets as shown. Tighten firmly but do not over tighten. Turn diverter handle (1) clockwise to ‘rim feed’ position. Turn on water supplies (2) and turn hot and cold handles (3) to open position for one Choose hook-ups for 1/2"...

This manual is also suitable for:

Charlotte 68485-lhp series