Quick Freeze; Quick Cool - Hotpoint SXBHAE 924 WD Instructions For Use Manual

Quick freeze

This mode is designed for when freezing items that are not already pre-frozen.
If you are placing fresh food inside the freezer then ideally you should have lowered the temperature
beforehand ready to accommodate it and facilitate as quick a freeze as possible. You may need to pre
select the quick freeze mode as early as 12 hours before. By selecting this function the temperature
of the freezer compartment will automatically be set to -24 °C for a maximum of 26 hours (after this
time the temperature will revert to what it was previously set at). If the temperature of freezer goes
below -24°C during the 26 hours then the appliance will exit the quick freeze mode automatically.
To use the quick freeze mode you must press the mode button until the quick freeze icon is lit on the
display. To exit the quick freeze mode press the mode button until no mode icon is lit on the display.
Quick freeze & cool
In order to have a colder temperature in the refrigerator, put the quick freeze & cool setting on to
set the unit to the coolest temperature. By selecting this function the temperature of the freezer
and fridge compartments will automatically be set to -24°Cand 2°Cfor a maximum of 26 hours for
the freezer setting and 2 hours 30 minutes for the fridge setting (after this time the temperature will
revert to what it was previously set at). If the temperature of freezer goes below -24°C during the 26
hours then the appliance will exit the quick freeze mode automatically.
To use the quick freeze and cool modes together you must press the mode button until the quick
freeze and cool icons are lit on the display. To exit the quick freeze and cool mode press the mode
button until no mode icon is lit on the display.

Quick cool

In order to have a colder temperature in the refrigerator, put the quick cool setting on to set the unit
to the coolest temperature. By selecting this function the temperature of the fridge compartment
will automatically be set to 2°C for a maximum of 2 hours and 30 minutes (after this time the
temperature will revert to what it was previously set at).
To use the quick cool mode you must press the mode button until the quick cool icon is lit on the
display. To exit the quick cool mode press the mode button until no mode icon is lit on the display.
Lock/unlock
To use the lock function you must press the lock button (the symbol on the display will be lit). This
will cause all actions to be ignored, until the lock is removed.
To unlock the display and functions, hold the lock button for 3 seconds (the symbol on the display will
be disappear).
19