Hotpoint SXBHAE 924 WD Instructions For Use Manual page 12

Replace Water Filter
1. Precautions before installation:
Before installation of accessories, it shall be ensured that the refrigerator is disconnected from
power.
After being used for 6 consecutive months, the
If that happens, please replace.
2. Schematic diagram
3. Procedures:
Pull out the plug. Turn off the water intake. Take off the filter and the snap ring on the quick
connector and then pull out the water pipe. Insert the new filter into the quick connector and
then install the snap ring. Re-supply water and check whether there is water flowing out.
If necessary, please repeat above steps. Insert the plug again. Keep pressing the
button for 3 seconds to start up the filter. The display of
indicator will flash.
disappears.
11