Hotpoint SXBHAE 924 WD Instructions For Use Manual page 11

2. Schematic diagram
3. Installing procedures
a. Push the end of the connecting hose into the joint. Fasten the joint to the faucet.
b. Pull out the nut from white flexible hose. Push the terminal of white flexible hose into the ho
connector, fastened with snap ring. If necessary, please rivet the flexible hose onto wall to avoi
stumbling.
c. Carefully unscrew the tap to check whether the pipeline is sealed.
Assembly and Fixing of Filter
List of tools to be provided by the user
1. Fix the single clamps on the wall with screws
2. Put the cartridge into the single clamps;
Location mark
3. Insert one end of the quick-connect elbow to the inlet of the filter cartridge, with the othe
end of the quick-connect elbow inserted to the inlet water pipe against the position mark and
fastened with snap ring;
4. Using the same way as mentioned above, insert one end of the quick-connect elbow to the outlet
of the filter cartridge, with the other end of the quick-connect elbow in erted to the outlet water
pipe against the position mark.
Joint Connecting hose
screwdriver
1
Snap ring
3
10
Hose connector
nut
Snap ring
2
Water supply
4