Hotpoint SXBHAE 924 WD Instructions For Use Manual page 16

Lock /unlock
In the unlocked state, continue to press the button
lock state;
In the locked state, continue to press the button
unlocked state.
All the following functions must be operated in the unlocking status.
Mode setting
Press mode button
Vacation mode
Press the button
after locking.
Press the button
FAST REFRIG.mode
Press the button
will start after locking.
Press the button
FAST FRZ. mode
Press the button
mode will start, after locking.
Press the button
Temperature setting of refrigerating chamber
Press temperature adjusting button of the refrigerating chamber
make flashing indication. Then press the button
hear one beep. Setting scope is between 2°C and 8°C.Every time you press the button, the
temperature will change 1°C. After adjusting,the digital tube will keep flashing for 5 seconds. New
temperature setting will come into effect after locking.
Temperature setting of freezing chamber
Press temperature adjusting button of the freezing chamber
make flashing indication. Then press the button
will hear one beep. Setting scope is between -16°C and -24°C. Every timeyou press the button, the
temperature will change 1°C. After adjusting, the digital tube will keep flashing for 5 seconds. New
temperature setting will come into effect after locking.
Quick-freeze time setting
Choose the quick-freeze mode
enter the quick-freeze time setting mode; with a short press on
of "26-48-26-48" after the quick-freeze time is shown on the freezer chamber temperature display
unit
The quick-freeze mode works separately under the 26H and 48H quick-freeze quitting modes.
With the quick-freeze time setting mode on, lock the mode or press the
the quick-freeze time setting mode.
The 48H quick-freeze mode is used for overall performance test and not recommendable for
customers.
ICE OFF
Press the button
icing function.
DISPERNSER
Press the button
condition of "Fetching ice cubes /Fetching crushed ice/ Fetching water / none", and then the
corresponding icon on the panel will be illuminated successively.
When the system is in operation, the working time of the filter will be added up; after 150 days, the
filter icon will be displayed, and 180 days, the filter icon flashed; press and hold the button
for 3s to utilize RESET function with which the working time of the filter is
reset.
After replace the filter, the flashed icon
to select different control mode.
to enter the vacation mode. Icon
or to exit the vacation mode.
to enter the quick cooling mode. Icon
to exit the Quick cooling mode.
to enter the quick freezing mode. Icon
to exit the Quick freezing mode.
and press the
and the icon is illuminated or distinguished in order to start/switch
to enter the ice/water selection condition; choose the circulating
for 3 seconds, enter the
for 3 seconds, enter the
lights up, the vacation mode will start
again to set the temperature, and will
, quick freezing region will
again to set the temperature, and you
button continuously for 3 seconds to
distinguished.
15
lights up, the quick cooling mode
lights up, the quick freezing
, cold storage region will
, set the circulating mode
for 3s to quit