Hotpoint SXBHAE 924 WD Instructions For Use Manual page 15

Functions
The actual configuration will depend on the physical product or statement by the distributor
Display
/
① FAST FRZ
④
Water Filter
⑦ Fetching crushed i c e
Button operation
A.Freezer compartment temperature adjustment
B.Fridge compartment temperature adjustment
C.Mode setting
D.Ice O FF/ ON botton
E. Fetching ice /
F.Lock/unlock controls
Operation instructions
The first time the power was turn on for the refrigerator, the display screen will total display for 3
seconds. Meanwhile the starting up bell rings and then the screen enters the normal display of the
operation.The first time for using the refrigerator, temperatures of refrigerating chamber,
temperature and freezing chamber should be set at 5° C/-18 °C respectively.
When the error occurs, the display shows the error code (see next page); during normal operation,
the display shows the set temperature of the cooling compartment.
Under normal circumstances, the refrigerator stops operating for 30 seconds, then the display shows
the lock state, and the display goes out after the lock state continued for 30s.
A
③
④ ⑤ ⑥
D
C
(Pictured above SBS I&W)
②
A
③
⑤ ⑥
④
C D
(Pictured above SBS IDI)
The picture above is only for reference.
F A S
②
Ice off
⑤
⑧
Fetching cold water
Fetching water/ Filter set
B
①
②
⑧
⑦
⑨
E
B
①
⑧
⑨
E
/
T R F E
③
⑥
⑨
14
F
F
Vacation icon
Fetching ice cubes
Lock/unlock icon