Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Elumen8 COB Tri 4 Pixel Batten
Summary of Contents for Elumen8 COB Tri 4 Pixel Batten
- Page 1 COB Tri 4 Pixel Batten User Manual Order code: ELUM081...
-
Page 2: Safety Advice
• This lighting fixture is for professional use only - it is • Make sure that the available mains supply voltage is not designed for or suitable for household use. The between 100~240V AC, 50/60Hz. product must be installed by a qualified technician in accordance with local territory regulations. The safety of • Make sure that the power cable is never crimped or the installation is the responsibility of the installer. The damaged. Check the equipment and the power cable fixture presents risks of severe injury or death due to fire periodically. hazards, electric shock and falls. • If the equipment is dropped or damaged, disconnect the • Warning! Risk Group 2 LED product according to mains power supply immediately and have a qualified EN 62471. Do not view the light output with optical engineer inspect the equipment before operating again. instruments or any device that may concentrate the beam. • WARRANTY: Two years from date of purchase. OPERATING DETERMINATIONS If this equipment is operated in any other way, than those described in this manual, the product may suffer damage and the warranty becomes void. Incorrect operation may lead to danger e.g: short-circuit, burns and electric shocks etc. Do not endanger your own safety and the safety of others! Incorrect installation or use can cause serious damage to people and/or property. www.prolight.co.uk COB Tri 4 PIxel Batten User Manual... - Page 3 5-PIN 5-PIN DMX INPUT DMX OUTPUT 01 - Fuse: T3.15A 250V 05 - 3-Pin DMX output 09 - Function buttons In the box: 1 x fixture, 02 - PowerCON input 06 - 5-Pin DMX input 10 - Microphone 1 x 13A powerCON mains cable & 03 - PowerCON output 07 - 5-Pin DMX output 11 - Safety eye 1 x user manual 04 - 3-Pin DMX input 08 - LCD display 12 - Earth point www.prolight.co.uk COB Tri 4 PIxel Batten User Manual...
-
Page 4: Dmx Mode
12 channel mode: Speed (slow-fast) 000-255 (when CH1 is 000-239) Sensitivity (low-high) (0-255) (0-255) (0-255) (0-255) (0-255) (0-255) 000-255 (when CH1 is 240-255) CH10 CH11 CH12 Master dimmer 000-255 (0-100%) (0-255) (0-255) (0-255) (0-255) (0-255) (0-255) 000-239 Strobe (slow-fast) 240-255 No function www.prolight.co.uk COB Tri 4 PIxel Batten User Manual... - Page 5 208-215 Flow 6 CH14 000-015 Green 4 (0-100%) 216-223 Flow 7 016-255 No function 224-231 Flow 8 CH15 000-015 Blue 4 (0-100%) 232-239 Flow 9 016-255 No function 240-255 Sound actve Master dimmer 000-255 (0-100%) (when CH1 is 000-135) Speed (slow-fast) 000-255 (when CH1 is 136-239) Sensitivity (low-high) 000-255 (when CH1 is 240-255) www.prolight.co.uk COB Tri 4 PIxel Batten User Manual...
-
Page 6: Sound-Active Mode
MODE” on all of the slave units. Now the slave units will follow in conjunction with the master unit. Press the “ENTER” button to confirm your setting. To exit out of any of the above options, press the “MODE” button. Built-in programs: To access the built-in program, press the “MODE” button to show “01.STATIC” on the LCD display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose one of the 14 built-in programs (01-14) (see table overleaf). To choose one of the seven colours in the “STATIC” mode, press the press the “ENTER” button and use the “UP” and “DOWN” buttons to choose one of the following 15 colours. To adjust the speed level in the remaining 13 built-in programs, press the “ENTER” button and use the “UP” and “DOWN” buttons to set the desired speed level (00-99). To adjust the flash speed press the “ENTER” button and use the “UP” and “DOWN” buttons to set the desired flash speed level (00-99). Press the “ENTER” button to confirm your setting. To exit out of any of the above options, press the “MODE” button. Setting flow invert: To set the flow invert, press the “MODE” button to show “FLOW INVERT” on the LCD display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to set the flow invert to on or off. Press the “ENTER” button to confirm your setting. To exit out of any of the above options, press the “MODE” button. NOTE: The frequency level (FQN01-99) adjusts how many times the program repeats before moving to the next program. www.prolight.co.uk COB Tri 4 PIxel Batten User Manual... - Page 7 Speed & flash ajustable Flash 00-99 Flow 4 7 colour chase Speed: 00-99 Speed & flash ajustable Flash 00-99 Flow 5 7 colour chase Speed: 00-99 Speed & flash ajustable Flash 00-99 Flow 6 7 colour chase Speed: 00-99 Speed & flash ajustable Flash 00-99 Flow 7 7 colour chase Speed: 00-99 Speed & flash ajustable Flash 00-99 Flow 8 7 colour chase Speed: 00-99 Speed & flash ajustable Flash 00-99 Flow 9 7 colour chase Speed: 00-99 Speed & flash ajustable Flash 00-99 www.prolight.co.uk COB Tri 4 PIxel Batten User Manual...
-
Page 8: Dmx Setup
DATA cable (DMX cable) requirements (for DMX operation): This fixture can be controlled via DMX-512 protocol. The DMX address is set on the back of the unit. Your unit and your DMX controller require a standard 3-pin XLR connector for data input/output, see image below. Further DMX cables can be purchased from all good sound and lighting suppliers or Pro Light Concepts dealers. Please quote: CABL10 – 2m CABL11 – 5m CABL12 – 10m Note: DMX cable must be daisy chained and cannot be split. www.prolight.co.uk COB Tri 4 PIxel Batten User Manual... -
Page 9: Line Termination
3-pin XLR (socket) Pin 1: GND (screen) Pin 1: GND (screen) Pin 2: Signal (-) Pin 2: Signal (-) Pin 3: Signal (+) Pin 3: Signal (+) Pin 4: N/C Pin 5: N/C www.prolight.co.uk COB Tri 4 PIxel Batten User Manual... -
Page 10: Weee Notice
Correct Disposal of this Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. www.prolight.co.uk COB Tri 4 PIxel Batten User Manual... - Page 11 COB Tri 4 PIxel Batten User Manual...
- Page 12 COB Tri 4 PIxel Batten User Manual...
Need help?
Do you have a question about the COB Tri 4 Pixel Batten and is the answer not in the manual?
Questions and answers