Table of Contents
Advertisement
MICROFLASH 4TE PRINTER USER'S GUIDE
Using a CardReader
Note:
he following information applies to printers
T
installed with the CardReader option.
Figure 15
General Guidelines
To wake up the CardReader, insert a card into the
CardReader slot. One short beep indicates the
CardReader/printer is awake.
If you are using a Smart CardReader, insert a card
with the gold contacts facing away from the printer
and leave the card in CardReader slot.
If you are using a Magnetic CardReader, insert a
card with the stripe facing toward the printer, then
slowly remove the card from the CardReader slot.
For information on CardReader LED indicators and
audio indicators, see
page 10
.
CardReader
CardReader
Slot
LED
Audio Indicators and LEDs on
14
Advertisement
Table of Contents
Need help?
Do you have a question about the MICROFLASH 4t and is the answer not in the manual?
Questions and answers