Dear customer!!
Thank you for good choice and purchase of Timberk electric fan
heater. It will serve you for a long time.
Timberk electric fan heater is designed to heat and create a
comfortable environment indoors during cold season. The fan
heater can be installed only in a vertically on a rigid foundation,
where there is possible to connect to 220-240V~, 50Hz single-
phase power supply wiring.
The heater based on a standard metal ceramic heating
element is convenient and easy-to-install, economical in use
in connection with minimum energy losses, increased heat
exchange and effective distribution of the air flow.
Please, read this operation manual carefully prior to assembly
and use of the product.
1. IMPORTANT INFORMATION
Please, read this manual carefully before use of the convector heater.
This manual contains important information regarding your safety, as well
as recommendations concerning the correct use and maintenance of this
appliance.
Keep this manual with a guarantee slip, cash register receipt and, if
possible, carton and packaging material.
The convector heater you have bought may slightly differ from that
described in the manual, but it does not affect its use and operation
procedures.
2
www.timberk.com • Electric metal ceramic fan heater
IMPORTANT!
Important safeguards and instructions contained in
this manual do not include all possible modes and
situations. It is necessary to understand that common
sense, caution and accuracy are factors, which cannot
be 'built-in' any product.
These factors should be considered by a person, who
is interested in the proper operation of the appliance.
The manufacturer is no responsible for damage of the
appliance or its parts during transportation, as a result
of incorrect installation or voltage fluctuations, as well
as when any part of the appliance has been changed
or modified.
2. PRECAUTIONS
When using the convector heater several safety precautions should be followed.
Incorrect operation due to disregard to precautions may cause harm to health of
the user and other persons, as well as damage to their property.
1. Read all the instructions before using the fan heater.
2. To avoid the risk of electric shock always unplug the appliance when not in
use. Remember that there is a small risk of electric shock from static electricity,
even when the appliance is turned off.
3. Never use the unit in a situation where it may come into contact with water. Do
not connect the device to the network, if the surface is wet.
4. Any appliance must be monitored, especially if far from it are children.
5. Unplug the power cord from the mains before cleaning to make preventive.
6. To turn off, set the power switch to «O» and unplug the power cord from the
wall outlet.
7. Keep the appliance cool or warm place.
8. Appliance plug must fit into a standard outlet to enter it without effort. If the
plug does not fit into the outlet or walks tight, turn the fork 180 degrees. If the
plug is not inserted as before, call your electrician to replace the outlet. Never
use the appliance if the plug into an outlet not put through.
9. If the power cord is damaged repairs should be performed only by a qualified
Need help?
Do you have a question about the TFH T20MDX and is the answer not in the manual?
Questions and answers