Fluke BC190/830 Instruction Sheet

Symbols
International electrical symbols used on the Product and in this document
are explained below.
Symbol

WARNING - RISK OF DANGER. Consult user documentation.
WARNING. HAZARDOUS VOLTAGE. Risk of electric shock.

DC (Direct Current)

Double Insulated

Conforms to European Union directives.

VI
Energy Efficiency Level VI
This product complies with the WEEE Directive marking
requirements. The affixed label indicates that you must not discard
this electrical/electronic product in domestic household waste.

Product Category: With reference to the equipment types in the
WEEE Directive Annex I, this product is classed as category 9
"Monitoring and Control Instrumentation" product. Do not dispose of
this product as unsorted municipal waste.
Conforms to relevant South Korean EMC Standards.

Certified by ETL Intertek to North American safety standards.

LIMITED WARRANTY AND LIMITATION OF LIABILITY
This Fluke product will be free from defects in material and workmanship for one
year from the date of purchase. This warranty does not cover fuses, disposable
batteries, or damage from accident, neglect, misuse, alteration, contamination,
or abnormal conditions of operation or handling. Resellers are not authorized to
extend any other warranty on Fluke's behalf. To obtain service during the warranty
period, contact your nearest Fluke authorized service center to obtain return
authorization information, then send the product to that Service Center with a
description of the problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH
AS FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED.
FLUKE IS NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR
THEORY. Since some states or countries do not allow the exclusion or limitation
of an implied warranty or of incidental or consequential damages, this limitation of
liability may not apply to you.
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
U.S.A.
11/99
Description
Fluke Europe B.V
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
Universal Mains-Power Adapter
Introduction
The BC190/830 is a universal mains-power adapter (the Adapter or
Product) for measurement, control, and laboratory equipment. The
Adapter is intended for operating and charging the Fluke 190-Series
ScopeMeter Test Tool (test tool). The Adapter is based on the switched-
mode concept for high efficiency, low stand-by power consumption, and
complies with level-VI requirements. It operates in a wide range of input
voltages from 100 Vac up to 240 Vac nominal.
A universal set of mains cords is included to make the Adapter suitable
for most types of mains outlet.
How to Contact Fluke
To contact Fluke, call one of the following telephone numbers:
• Technical Support USA: 1-800-44-FLUKE (1-800-443-5853)
• Calibration/Repair USA: 1-888-99-FLUKE (1-888-993-5853)
• Canada: 1-800-36-FLUKE (1-800-363-5853)
• Europe: +31 402-675-200
• Japan: +81-3-6714-3114
• Singapore: +65-6799-5566
• Anywhere in the world: +1-425-446-5500
Or, visit Fluke's website at www.fluke.com.
To register your product, visit http://register.fluke.com.
To view, print, or download the latest manual supplement,
visit http://us.fluke.com/usen/support/manuals.
PN 4833144
September 2016
© 2016 Fluke Corporation. All rights reserved
Product specifications are subject to
change without notice.
BC190/830
Instruction Sheet