Richell 80043 Read Me First page 3

<For XS & S size>
Shoulder
Seat Belt
Place this product in the car seat and make sure
the Door faces the front of the vehicle. Then attach
the Lap Seat Belt to the Seat Belt Hook. Then lock
the seat belt in place.
<For M size>
M size can be placed only in the back seat of your vehicle.
l Check the opening of the vehicle door to make sure the product can be entered and placed.
l Make sure the door frame faces the vehicle's side door.
l Depend on the type of seat belt of the vehicle, please check whether to use one 3-point or two 3-point seat belts when placing
this product.
When Used for One 3-point Seat Belt
1. Attached Lap Seat Belt to
the 2 Seat Belt Hooks on the
top of this product.
2. Then, lock the seat belt in
place.
3. Make sure the seat belt
locks correctly. Hold this
product and pull the
Shoulder Seat Belt as
shown adove.
Seat Belt Hook
1. Remove the door frame by pushing the both
side of door locks.
F r o n t F r o n t
＜Steel part＞
l
Wring a towel soaked in mild detergent and water, and gently wipe the product. After wiping, place the product in an airy and
shady location to avoid discoloration, deformation, rusting.
l
Do not use a scrub brush and/or a polishing powder as these may cause scratches, rust and/or discoloration to the product.
l
When using creosol or other disinfectants, make sure to dilute them, it may cause discoloration to the product.
l
Do not use harsh chemicals such as thinner, benzene, or alcohol as these may cause discoloration to the product.
＜Plastic part＞
l
Use a mild detergent and water to clean. After cleaning, place in shaded area to air dry. Do not place this product in direct
sunlight. This may cause discoloration, deformation or rust.
UPC (803840-)
Dimension
Width x Depth x Height (inches)
Main Unit / Handle / Middle of Pin
Hooks (only for XS and S size) / Case for Door Lock
Door Frame / Back Frame / Cover for Handle (only for M size) / Side Sliding Latch /
Frame Lock / Frame Hinge Pin (only for XS and S size)
Door Lock
Door / Door Axis
Top and Botton Pin / Frame Lock Pin / Frame Hinge Pin (only for M size)
l
Please note that product specifications and design may change without prior notice for the purpose of quality improvement.
l
This product is designed to attach to the 3-point Seat Belt. Do not use for the 2-point
Seat Belt. Not for use with automatic seat belts or vehicles with no seat belts.
Seat Belt Hook
Lap Seat Belt
Make sure the seat belt locks correctly. Hold Make sure the seat belt locks correctly. Hold
this product and the Lap Seat Belt and pull this product and the Lap Seat Belt and pull
the Shoulder Seat Belt as shown above. the Shoulder Seat Belt as shown above.
Shoulder
Seat Belt
Lap Seat Belt
This product can be used as Pet Crate.
2. The door frame can be stored on
to the back frame. Pushing both
door locks. Then, release the
Seat Belt Hook
door lock at the position where
Door Frame the door axis into the axis hole of
top and bottom on the back
frame.
Door Lock
80043-0 / 80044-7 / 80045-4 80046-1 / 80047-8 / 80048-5 80049-2 / 80050-8 / 80051-5
Carrier or Crate 12.0 x 19.0 x 12.0"
When it's folded
12.0 x 18.5 x 4.5"
Material
When Used for Two 3-pint Seat Belts
1. Attached the Lap Seat Belt to
the Seat Belt Hooks on the top
of this product on one side.
2. Then, lock the seat belt in
place.
3. Make sure the seat belt
locks correctly. Hold this
product and pull the
Shoulder Seat Belt as shown
above.
4. Repeat the same steps for other
side of vehicle.
13.5 x 22.0 x 15.0"
13.5 x 22.0 x 4.5"
Polypropylene
Polypropylene
ABS resin
ABS resin
Steel (Polyester powder coating)
Stainless-steel
Top view of this product
<XS & S size>
Seat Belt Hook
<M size>
Seat Belt Hook
Seat Belt Hook
③
Shoulder Shoulder
Seat Belt Seat Belt
Lap Seat Belt
Back Frame
B a c k B a c k
Door Axis
Axis Hole
17.5 x 26.5 x 20.0"
17.5 x 26.0 x 5.0"
Country of Origin
JAPAN
CHINA
JAPAN
CHINA