Getting Ready - Bissell STEAM & SWEEP 57F4-F Series User Manual

Table of Contents

Advertisement

O
perations
special features
Removable water tank
The water tank is located on the back of
the Steam & Sweep. It can be refilled
with water any time during use. Distilled
or demineralized water is recommended
in place of tap water.
do not use chemicals with your
steam & sweep.
Water purification system
This filter removes minerals and other
impurities from tap water, preventing
water deposits from damaging your Steam
& Sweep. It should be replaced when the
bright green grains turn blue. To maximize
performance of the filter, distilled water
should be used.
Ready light
The ready light will glow when water has
been converted to steam and the Steam &
Sweep is ready to use.
steam on demand trigger
Press to release steam.
maneuverable swivel head
Allows you to pick up dust and small
debris while steam cleaning your floor.
The maneuverable swivel head gets into
tight spaces and under cabinets.
Washable mop pads
Reusable microfiber mop pad is machine
washable and safe for all hard floor surfaces.

getting ready

1. The mop pad may have already come
attached to the swivel head. If not, attach
mop pad to swivel head using the Velcro
strips.
2. fill the water tank.
a. Remove the tank by lifting straight up
and away from the unit.
b. Unscrew the cap at the bottom of
the water tank and remove the insert
assembly.
6
w w w . b i s s e l l . c o m
Tip:
To prevent damage to the
machine, do not attempt to use
your Steam & Sweep without
water in the tank.
2a.
2b.

Advertisement

Table of Contents
loading

Table of Contents