On-Screen Displays And Data Code - Canon VIXIA HF10 Instruction Manual

Video
Applying
1
If the joystick guide does not
appear on screen, press
display it.
If does not appear on the joystick
guide, repeatedly push the joystick
( ) toward [NEXT] to display it.
2
Push the joystick (
• The icon of the selected effect
turns green.
• Push the joystick (
deactivate the digital effect (its
icon will turn white again).
T F I
O ADE N
Activate the selected fader in record
pause mode ( ), then press
START/STOP
to start recording with a
fade in.
T F O
O ADE UT
Activate the selected fader while
recording ( ), then press
to fade out and pause the recording.
T
O ACTIVATE AN EFFECT
mode: Activate the selected
effect while recording or in record
pause mode.
mode: Activate the selected effect
PHOTO
and then press
still image.
54
to
) toward .
) again to
START/STOP
to record the
NOTES
• When you apply a fader, not only the
picture but also the sound will fade in or
out. When you apply an effect, the
sound will be recorded normally.
• The camcorder retains the last setting
used even if you turn off the digital
effects or change the recording
program.

On-Screen Displays and Data Code

With every scene or still image
recorded, the camcorder keeps a data
code that includes the date, time and
information about the camera setup at
the time of recording. While viewing a
still image, all the data is displayed in
the form of information icons. During
movie playback you can select what to
display with the [DATA CODE] setting
( 95). You can also turn most on-
screen displays on or off.
Repeatedly press
on-screen displays on/off in the
following sequence:
DISP.
to turn the