Reviewing And Deleting The Last Scene Recorded - Canon VIXIA HF10 Instruction Manual

Video
2
When you wish to resume
recording, open the LCD panel.
Within less than 1 second, the
indicator will return to green and the
camcorder will be ready to record.
IMPORTANT
Do not disconnect the power source
during standby mode (while the
indicator is lit in orange).
NOTES
• If you close the LCD panel under some
circumstances (for example while
recording, while a menu is being
displayed, or while the memory card slot
is open), the camcorder may not enter
the standby mode. Check that the
indicator changes to orange.
• The camcorder will shut off if left in
standby mode for 10 minutes,
regardless of the [POWER SAVE] setting
ON/OFF
( 97). Press
camcorder.
• You can select the length of time until
shut-off or turn off the Quick Start
function with the [QUICK START] setting
97
( ).
Reviewing and Deleting the Last Scene
Recorded
Even in mode you can play back
the last scene recorded in order to
check it. You can also delete the scene
while reviewing it.
38
to turn on the
1
If the joystick guide does not
appear on screen, press
display it.
If does not appear on the joystick
guide, repeatedly push the joystick
( ) toward [NEXT] to display it.
2
Push the joystick (
The camcorder plays back the last
scene (but without sound) and
returns to record pause mode.
Deleting a Scene After Recording It
After recording a scene:
1
Review the scene as described in
the previous section.
2
While reviewing the scene, select
( ) the icon and press
3
Select ( ) [YES] and press
NOTES
• Avoid any other operations on the
camcorder while the scene is being
deleted.
• You will not be able to delete the last
scene if after the scene was recorded
you changed the operating mode or
turned the camcorder off.
( 26)
to
) toward .
.
.