44
www.electrolux.com
17.11 Cleaning the inlet hose filter and the valve filter
It could be necessary to clean the filters when:
•
The appliance does not fill with water.
•
The appliance takes long time to fills with water.
•
The indicator of the Start/Pause button flashes and the display shows the related alarm.
Refer to 'Troubleshooting' chapter.
To clean the water inlet filters:
1
2
20°
3
45°
•
Close the water tap.
•
Remove the water inlet hose from the
water tap.
•
Clean the filter in the inlet hose with a stiff
brush.
•
Remove the inlet hose behind the
appliance.
•
Clean the filter in the valve with a stiff
brush or a towel.
•
Install again the inlet hose. Make sure that
the couplings are tight to prevent
leakages.
•
Open the water tap.