Electrolux EW9W7449S9 User Manual page 18

18 www.electrolux.com
Touch this button repeatedly until the
desired temperature value appears on
the display.
When the display shows the indicators
and
the water.
8.4 Spin
When you set a programme, the
appliance automatically sets the
maximum spin speed allowed.
Touch repeatedly this button to:
• Decrease the spin speed.
The display shows only
the spin speeds available
for the set programme.
• Set the drain-only option (Skipping
the wash, rinse and spin phases):
Drain.
The appliance performs the only
draining phase of the selected
washing programme.
The display shows the indicator
(cold), and the indicator
spin) and the indicator
• Set the spin-only option (Skipping
the wash and rinse phases) : Spin
only.
Before setting this option,
select a suitable washing
programme for the
garments. The appliance
will performs the most
fitting spin cycle for your
garments care (e.g. For
synthetics items, first
select the Synthetics
washing programme and
then the Spin only
option).
The appliance performs only the
spinning phase of the selected
washing programme.
The display shows the indicator
(cold), the phase indicator
spin speed.
, the appliance does not heat
.
8.5 Stains +/Prewash
Press this button repeatedly to activate
one of the two options.
The relevant indicator goes on in the
display.
• Stains
Select this option to add an anti-stain
phase to a programme in order to
treat heavily soiled or stained laundry
with stain remover.
Pour the stain remover into
compartment
will be added in the appropriate phase
of the washing programme.
• Prewash
Use this option to add a pre-wash
phase at 30 °C before the washing
phase.
This option is recommended for
heavily soiled laundry, especially if
(no
containing sand, dust , mud and other
solid particles.
8.6 Delay start
With this option you can delay the start of
a programme in a more convenient time.
Tap on the button repeatedly to set the
required delay. The time increases by
steps of 30 minutes up to 90' and from 2
hours up to 20 h.
After starting the cycle by the means of
the Start/Pause button, the display
shows the selected delay time and the
appliance begins the countdown.
8.7 Time Manager
and the
With this option you can decrease the
programme duration.
• If your laundry is normally or lightly
soiled, it may be advisable to shorten
. The stain remover
This option is not
available with a
temperature lower than
40 °C.
The options can increase the
programme duration.
These two options cannot be
set together.