Steam Australia PEGASO SVD Quick Start Manual

Advertisement

Quick Links

PEGASO SVD Quick Start Guide
i
ii
iii
vi
iv
PEGASO SVD
_______________________________________________________________________________________________

Preparing the PEGASO

Steam Operation:
1. Plug cable into a wall outlet. NOTE: Do NOT use
multi-outlet power-boards and avoid using low-
quality extension cables.
2. Open water tank
filler cap (i), fill
tank with clean tap
water up to the
line indicator on
the left-side panel
(iv) then close filler
cap. NOTE: Do NOT
use de-mineralised water, do
NOT fill above maximum line
indicator (iv) and do NOT fill
with any chemicals.
3. Turn PEGASO on using the
ON/OFF switch (a), making sure
the "ON" LED (o) lights up and the machine beeps
straight away.
4. Press the 'Boiler Switch' button on
the display (c) to start the boiler. After
approx. 10 minutes the digital display
(b) showing the boiler temperature
should show a temperature at or
slightly above 170C and the machine
should be at pressure (p). This means
that the steam function is ready to use.
5. Connect hose into the PEGASO by opening the
protective plastic flap located on the front of the
machine (v) and pushing the plug end of the hose in
with the "doman" imprint on the top side of the
hose until it clicks.
Tel: 1300 79 50 50 E-mail:
b
c
v
e
PEGASO Display
i
iv
p
info@steamaustralia.com.au
a
INCLUDED
d
f
o
g
S/V HOSE
p
Proceed to "Vacuum Operation" and/or "Detergent
Operation" section if you are planning on using the vacuum
and/or detergent functions together with the steam
functions.
Vacuum Operation:
Locate the vacuum
switch (S) on the
vacuum head unit (iii)
and turn it on.
NOTE: The vacuum
bucket can be cleaned
by detaching the bucket from the vacuum head
through the latch that holds it. Always make sure the
bucket is fitted on properly to ensure that the
contents will not disperse to your surroundings.
Detergent Operation:
1. Open
detergent tank
filler cap (ii), fill
tank with
detergent
2. Remove the
detergent tank
filler cap and
fill with the diluted 101 degreaser solution until it
reaches up to the line indicator on the right-side panel
(vi). NOTE: We recommend using Steam Australia's
101 degreaser or similar to ensure it does not impact
machine operation and/or cause adverse health
issues.
3. Replace the detergent filler cap (ii) before
operating.
Web: www.steamaustralia.com.au
OPTIONAL
T
S/O HOSE
PEGASO Hose Controls
S
ii
h
k
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PEGASO SVD and is the answer not in the manual?

Questions and answers

Summary of Contents for Steam Australia PEGASO SVD

  • Page 1 (vi). NOTE: We recommend using Steam Australia’s 5. Connect hose into the PEGASO by opening the 101 degreaser or similar to ensure it does not impact...
  • Page 2 PEGASO SVD Quick Start Guide Hose Handle Operations Steam Function: Warning Lights 1. After approx. 10 minutes, check that the machine The PEGASO will make a beeping noise and a red LED has reached pressure. Ready light will be illuminated light will flash when the water tank’s level is low:...
  • Page 3 PEGASO SVD Accessories Guide Floor Tool S/V For hard floor surfaces such as: - Tiles KIT0804 Floor Brush - Marble 300mm - Most sealed hardwood - Linoleum & Vinyl - Carpets KIT0822 Teflon - Non-slip surfaces Carpet Insert First, use high steam pressure to lift KIT0824 Rubber Lip dirt off the floor.
  • Page 4 PEGASO SVD Accessories Guide Detailing Extension + Small Nylon Brush (Steam Only) For detail cleaning in kitchens, bathrooms and other areas: KIT0703 Steam - Tile grouts (walls and floors) Lance 100mm - Drains - Cooktops - Bathtubs 2 x KIT0701 S/O...
  • Page 5 PEGASO SVD Accessories Guide Car Wash Upholstery Tool (Steam + Vacuum) The optional KIT0800/CW6M Hose features a shorter handle grip that gives an easier access for use in car detailing jobs. When used in conjunction with the KIT0806/CW Car KIT0806/CW upholstery tool, it is the best...
  • Page 6 PEGASO SVD Accessories Guide Floor Brush (Steam Only) For cleaning walls & floors where abrasion is required. Including tiles & grout, marble, sealed concrete, linoleum & vinyl & non slip surfaces. Sanitising soft KIT0707 surfaces such as carpet, mattresses &...

Table of Contents