Wavecrest TidalForce M-750 Owner's Manual page 42

Troubleshooting
Problem
Computer reads
zero (0) mph at all
speeds
Computer readings
are inaccurate
TidalForce M-750 High Performance Electric Bicycle Owner's Manual
Possible Cause
Dirty magnet or
sensor
Improper magnet
alignment with
sensor
Broken wire,
sensor, or
computer
Computer not
properly set up or
configured
Remedy
Clean magnet on right-hand spoke and sensor
on right-hand fork tube.
Align center of magnet with marking line on
sensor and ensure distance between the magnet
and sensor is 2mm. Loosen magnet holder or
sensor mount as necessary for alignment.
Take bicycle to dealer for checkout/repair.
Refer to Cateye Bicycle Computer Operations
Manual supplied with your bicycle for
instructions on computer set-up and
configuration.
WaveCrest Laboratories
42