Related Manuals for Ropox QUICKWASH COMPLETE
Summary of Contents for Ropox QUICKWASH COMPLETE
- Page 1 ROPOX QUICKWASH COMPLETE User manual This manual should always be in close proximity of the product. TF 200.01.0010_ENG / Date 05-03-2021...
-
Page 2: Table Of Contents
TF 200.01.0010_ENG Table of content Symbols used in this manual ........................3 General safety ............................3 Product Unit label ........................5 General requirements ..........................5 3.1 Product information ........................5 3.2 Product description ........................6 3.3 Intended use..........................6 3.4 Intended operator .......................... 6 3.5 Essential performance ........................ -
Page 3: Symbols Used In This Manual
Do not perform repairs, disassembly or assembly operations, add-ons, re-adjustments or modification of the product beyond what is described in this manual. These must be carried out by Ropox or Ropox authorized personnel. Do not perform service while in use. - Page 4 The information in this manual is based on correct installation in accordance with installation instructions for this product. Ropox cannot be held liable if the product is used in any way that differs from stated in this manual and/or installation instruction.
-
Page 5: Product Unit Label
Do not dispose as unsorted municipal waste. Product must be returned to a designated recycling station. Operating and storing temperatures may not exceed 5-40C° 3. General requirements 3.1 Product information Manufacturer: Ropox A/S Ringstedgade 221, DK-4700 Naestved +45 55 75 05 00 Email: Info@ropox.com Product models Part number... -
Page 6: Product Description
5-40C° Operation and storage 3.2 Product description Ropox QuickWash is a small height adjustable system for a washbasin. It can be height adjusted 14 cm, while also projecting the attached washbasin 20cm out from the wall for added legroom. 3.3 Intended use Ropox QuickWash is intended for use in both homecare and professional healthcare environments. -
Page 7: Product Dimensions
TF 200.01.0010_ENG 3.9 Product dimensions 40-42120 – QuickWash Unit NB: All dimensions are in mm... - Page 8 TF 200.01.0010_ENG 40-42121 – QuickWash Complete Up position Down position NB: All dimensions are in mm “X” measurement is based on an individual measurement of the specific wheelchair-seated end- user of the product. See mounting instructions for more details.
-
Page 9: Instructions For Use
TF 200.01.0010_ENG 4. Instructions for use 4.1 Installation Interfaces 4.1.1 Construction The wall must be of a suitable material for screws and approved Note the maximum tensile load of the top for wet rooms. screws and ensure that both the structure of the wall and choice of rawl plugs can withstand the force. -
Page 10: Mounting Instructions
TF 200.01.0010_ENG 4.2 Mounting Instructions Prior to the installation, please make sure that all parts have been provided in accordance with the list of components (Section 7). 4.2.1 Determine mounting height A) With the primary user seated in their wheelchair, measure the height to the top of user’s legs (X). -
Page 11: Drill Holes And Mount Unit On Wall
TF 200.01.0010_ENG 4.2.2 Drill holes and mount unit on wall A) Drill holes at the 8 marked locations on the wall B) Insert appropriate wall plugs fitting of the type of wall in which the product is to be installed C) Mount the QuickWash unit on the wall using the included frame screws *7,5x75mm... -
Page 12: Attach Plumbing And Faucet
TF 200.01.0010_ENG 4.2.4 Attach plumbing and faucet... -
Page 13: Attach Cover Plate
TF 200.01.0010_ENG 4.2.5 Attach cover plate A) Lower the unit to the down position by releasing the grey lever/arm on the side of the unit B) Slide cover on from above. Take care not to bend the “fingers” on the sides A) Position the bottom tabs of the cover beneath the wall-bracket and fix in place with the 4 dome-headed M5 screws... -
Page 14: Operating The Product
TF 200.01.0010_ENG 4.3 Operating the product Height adjustment The washbasin position is adjusted manually. A counterbalance system makes it easy to lift and lower the wash basin. Lowering from high to low position (1) Press the grey release lever on the left-hand side of the unit towards the wash basin (2) While holding down the release... -
Page 15: Residual Risk
TF 200.01.0010_ENG 4.4 Residual risk Warning Be aware that there are no persons under the wash basin when it is driven down, as a danger of impact and head trauma may occur. Caution Do not place the hand between the wall and the unit during unit movement, as a danger clamping may occur. -
Page 16: Cleaning
TF 200.01.0010_ENG 5. Cleaning Cleaning can be done with lukewarm water and a suitable all-purpose cleaning agent. Use a cloth or soft sponge to wash the product. Dry the product of with a wrung cloth. Notification! Do not use cleaning agents containing abrasive e.g. scouring powder, steel wool, scouring sponge. -
Page 17: Components Part List
TF 200.01.0010_ENG 7. Components part list 1 (one) height adjustment unit 40-42120 List of components for Complete models 40-42121 1 (one) washbasin 1 (one) mixer tap 97001584 Oras Saga 3910F 1 (one) plumbing kit 1 (one) kit of mounting parts for bolt 1 (one) Siphon mounted washbasin 1 (one) 97001172 Flexible drain hose ø32... -
Page 18: Environmental Protection
1 (one) cardboard template for hole Notification! Ropox will make parts list and circuit diagrams available for extraordinary maintenance and repair beyond what is described in this manual. Repair beyond what is described in this manual may only be done by Ropox designated service personnel.
Need help?
Do you have a question about the QUICKWASH COMPLETE and is the answer not in the manual?
Questions and answers