Dyson Purifier Humidify+Cool User Manual page 12

Step 7
Rinse
Unclip the cap, take the evaporator out of the water tank and rinse under
a cold tap.
Wipe away any excess water to avoid drips and place the evaporator to
one side.
Rinse the water tank under a cold tap. Wipe the inside of the tank to
remove any excess solution and any debris.
Step 8
Refill
Refill the water tank to the Max level and wipe off any excess water and
replace the cap, making sure that the cap clips are secured.
Step 9
Reassemble
Push the evaporator back into your machine, making sure that it is securely
in position.
Close the inner door and replace the outer covers.
Make sure the cap is completely dry. If wet, wipe thoroughly with a dry cloth.
Slide the water tank back into your machine and make sure it is securely
in place.
MAX
level
The evaporator is inserted
behind the door that springs
open when pressed, inside
your machine.