Table of Contents
Advertisement
DVD Setup
DVD SETUP
To enter this menu please ensure the TV is in DVD source & press [DVD SETUP]
If you wish to make changes to any of the default settings, use the scroll
To confi rm any settings press [OK] button. To exit this menu at anytime, press [DVD SETUP] button.
TV Display
- Choose from the following options
4:3 Pan scan
4:3 Letter box
Wide
Speaker Setup
- Choose from the following options
LT/RT
Stereo
Dual Mono
- Choose from the following options
Stereo
Mono L
Mono R
Mix Mono
Dynamic Range
with DVD discs recorded in Dolby digital.
Full
3/4
1/2
1/4
Off
TV Type
- Choose from the following options
PAL
Multi
NTSC
Default
- Choose from the following options
Reset
Tip: This TV/DVD player is pre-set to play Region 2 DVDs. In the event you wish to use the TV/DVD in
another country that uses different region discs, please visit www.umc-uk.co.uk. Select 'Product Support',
'Changing Region'.
28
Applies to models with built-in DVD players only
PS Traditional picture format, often used on old fi lm
LB Traditional picture which has been adapted for widescreen
16:9 Widescreen picture format
Converts from multi-channel sound to mono
Converts from multi-channel sound to stereo
Outputs 2 channels of sound both left and right
Outputs left side sound
Outputs right side sound
Outputs a single channel of sound but mix between right and left
- This is the difference between the quietest and loudest sounds. This setting works only
Set this to listen with the range recorded on the disc
Set this to listen with a range equivalent to a normal television
Set this to listen with a smaller difference between the maximum and minimum volume
Set this to listen with a smaller difference between the maximum and minimum volume
Set dynamic range to off
For discs from UK/Europe, Asia, Australia etc
For both NTSC and PAL
For discs from North America, Japan etc
Resets all options in the 'DVD setup' menu back to the default settings
buttons.
Advertisement
Table of Contents
