Important safety instructions Do not place the appliance near heating elements or in CAUTION a place with direct sunshine as it has a negative eff ect on cooling of the appliance. Heat storage is dangerous and it RISK OF ELECTRIC SHOCK DO NOT OPEN can seriously reduce the lifetime of the appliance.
Page 3
Important safety instructions Important information regarding use of Batteries video games, computers, captions and Observe the correct polarity when inserting the batteries. other fi xed image displays. Do not expose batteries to high tempera- tures and do not place them on locations ...
Page 4
Important safety instructions 3D Safety Information If you watch the 3D imaging too closely or for a long period of time, it may harm your eyesight. Watching the TV or playing video games that incorporate 3D imaging with the 3D glasses for a long period of time can cause drowsiness, headaches or fatigue to you and/or your eyes.
Page 5
What is included in the box fi g 1 fi g 2 Supply of this TV includes following parts: Wrong Correct Viewing angle Viewing angle Viewing angle Viewing angle 1x TV 1x Remote control Important Note Position the TV close to the wall to avoid the possibility of it falling when pushed.
Getting started - initial set up Using the RF cable supplied, connect the TV to the TV Aerial wall socket. Connect the power cable to the Electrical outlet. Turn on the device with marked ON/OFF switch Insert the batteries supplied into the Remote control and press the Standby button to power on the TV.
Remote control STANDBY – Switch on TV when in standby or vice versa. STANDB Y MUTE MUTE – Mute the sound or vice versa. TV/RADIO TV GUIDE DTV– Switch to digital TV source. EJECT RADIO - TV/RADIO – Switch to Digital and switch between TV and radio in Digital mode.
TV buttons & Source menu Connections Eject * Play / Pause * Vol+ Volume up and menu right Vol- Volume down and menu left HDMI 1, 2*, 3* in USB-Input HDMI-Input 1, 2, 3* Programme/Channel up and menu up Programme/Channel down and menu down MENU Displays Menu/OSD SOURCE...
Page 9
Connections Connecting a DVD Player/Recorder, Video Recorder or Cable/Satellite Box TVs Input/Source should be set to SCART. SCART SCART RF OUT RF IN RF IN Connecting a Camcorder, Camera or Games Console Connecting a High Defi nition (HD) Device by HDMI TVs Input / Source should be set to Video.
Page 10
TV Menu operation TV Menu navigation Picture To access this menu, press [MENU] button on the remote control. To enter a menu press [OK] If you wish to make changes to any of the default settings, use the scroll buttons. (▲/▼/◄/►) To confi rm any settings press [OK] button.
TV Menu operation 3D Settings * 2D to 3D- Changes the picture from regular 2 dimensions to 3 (3D). Please note as content is being changed by the TV the For the best 3D picture eff ect, watch your TV from vertical angle eff ects are limited +/- 10°.
Page 12
TV Menu operation Sound Time Sound Mode - Choose from the following presets: Clock - Set the date and time. Date and time is set up automatically in DVB mode. Standard Default settings Off Time - Allows you to set a specifi c time for your TV to turn Music Emphasises music over voices off .
Page 13
TV Menu operation HDMI CEC - Allows you to operate devices conected via HDMI Setup with TV remote control. Auto power - Automatically turn on/off connected devices via HDMI CEC Device menu - Allows you to acces devices menu and operate the menu using TV remote control.
TV Menu operation 7 Day TV Guide 2. Select the drive you require. (If your drive only has 1 partition you will only see 1 item). TV Guide is available in Digital TV mode. It provides information about forthcoming programmes (where supported by the Digital channel).
Page 15
TV Menu operation DVD Menu* PVR / DVD To access this menu, press [D. MENU] button on the remote Dolby Digital Page control. If you wish to make changes to any of the default Dual Mono ▲/▼/◄/► settings, use the scroll buttons.
Frequently asked questions General I would like to have louder There are 2 options: sound by connecting 1) Use Digital COAX output connected to an external amplifi er/surround sound additional speakers. system. 2) Use the 3.5mm headphone output and a 3.5mm to phono cable (available separately) to connect to an amplifi er/surround sound system.
Need help?
Do you have a question about the 32/122I-GB-5B-HBKU-UK and is the answer not in the manual?
Questions and answers