Toro Z MASTER 4000 Series Service Manual page 84

Aluminum Spindle Disassembly (continued)
Deck: Service and Repairs
g339541
5. Remove the 6 (3/8 inch) flange lock nuts securing the spindle to the deck
(from bottom).
g339542
6. Lift spindle assembly from the deck.
7. Remove the housing ring (if applicable).
8. Slide spindle shaft out of spindle housing.
9. Move bearing spacer to the side in order to gain access to the inner race
of the bottom bearing.
Figure 68
Figure 69
Page 6–12 4000 Series Z MASTER® Service Manual
3442-427 Rev A