Toro Z MASTER 4000 Series Service Manual page 59

Seat Removal (continued)
Seat Installation
4000 Series Z MASTER® Service Manual
3442-427 Rev A
g346225
7. With assistance, lift the seat pan/seat assembly away from the machine.
8. Remove the 4 (5/16 inch) locks securing the seat pan to the seat assembly.
1. Install and tighten the 4 (5/16 inch) lock nuts securing the seat pan to the
seat assembly.
2. With assistance, install the seat pan/seat assembly into the machine.
3. Connect the seat switch to the seat. With assistance, slide the seat pan/seat
assembly forward and tip upwards to gain access to the seat switch
connector.
g346225
4. Install the 2 (5/16 inch) torx screws securing the seat pan to the chassis.
5. Install the 2 (5/16 inch) torx screws securing the front tank retainer plate
to the seat pan.
Figure 36
Figure 37
Page 5–19 Chassis: Service and Repairs