ROPS (Roll Over Protection System) Removal (continued)
ROPS (Roll Over Protection System) Installation
4000 Series Z MASTER® Service Manual
3442-427 Rev A
g346263
10. Lift the lower tubes away from the chassis.
1. Install the lower tubes onto the chassis.
2. Install the 4 (½ inch, 2 per side) bolts and lock nuts securing the lower tubes
to the chassis.
g346263
Upper ROPS assembly is heavy, assistance or support is needed for
removal. Personal injury or damage may occur.
Figure 48
Figure 49
CAUTION
Page 5–27
Chassis: Service and Repairs