Advertisement
Figure 5.16 Install Flex Venting to Side Discharge Assembly
Figure 5.17 Flex Venting Installed
10
Hearth & Home Technologies • PHSI-MCE Instructions • 2560-973 • 6/20
6. Finishing Instructions - Side Discharge
1. Apply wall sheathing material, such as drywall, up
to 1/2 inch thick up to the edge of the installed side
discharge assembly. See Figure 6.1 and Figure 6.2.
WARNING! Risk of Overheating! DO NOT apply wall
sheathing past outside edge of plenum. Overheating of
appliance and combustible materials will occur.
Figure 6.1 Wall Sheathing Installed
Figure 6.2 Finishing Edge
Advertisement
