Sharpening Of Three Cuts Mills - Elite AFILAmaq MINI User Instructions

6.3 Sharpening of mills cutters T
We will use the fixture for straight shank mills. You will also need the drill
sleeve for conical stem mills. The drill sleeve can be put directly into the hole
of the tool holder. The grinding wheel tilts down 3°-10 ° and held by the
seatback angle. The stop of the clamp is lifted to the side of the end mill. The
right hand indicates the cutting tool, the left hand moves the worktable in the
longitudinal direction and sharpens the mill.

6.4 Sharpening of three cuts mills

Sharpening the right:
The staff of the stem is fixed to the machine. The stop of the clamp rises to the
front of the mill. The right hand indicates the cutting tool, the left hand moves
the worktable in transversal direction and sharpens the mill.
Sharpening the side:
To sharpen the top of the mill, the clamp is used to index the mill. The
toolholder axis tilts up 6º-8º, and moves 83º-88º from left to right and it is
fixed. The right hand indicates the cutting tool, the left hand moves the
worktable in transversal direction and sharpens the mill.
If the operator wants to sharp over three cuts mills tracks simultaneously, he
can fix in the accessory stem and use the template double rod apices
sharpening.
C/Casanovas 1, 08782, St. Joan Samora - Barcelona (Spain) - Phone +34 932 935 178 - info@elite.cat
19 !