Table of Contents
Advertisement
Screen Displays
LCD Screen Displays
E
You can hide the displays on the LCD screen to have a clear screen for playback.
CAMERA
DISPLAY SET UP
(
42)
Open the menu and select [DISPLAY SET UP]. Select [DISPLAYS], set it to
[OFF <PLAYBK>] and close the menu.
• The LCD screen will become completely blank (also the TV screen if connected).
• Warning messages still appear, and the data code appears if turned on.
• Tape operation displays appear for 2 seconds.
• Displays cannot be hidden on the index screen.
TV Screen Displays
When you connect a TV for recording/playback, you can hide the displays on the TV
screen. For connecting instructions, see
CAMERA
Press the TV SCREEN button on the wireless controller.
• When the POWER switch is set to CAMERA: The displays
disappear from the TV screen and appear when you press the
button again.
• When the POWER switch is set to PLAY (VCR): The displays appear on the connected TV
screen and disappear when you press the button again. The setting resets to the OFF
setting when you turn the camcorder off.
When the TV screen displays are hidden, the displays still appear on the LCD screen. If
you turn on the data code, displays other than the data code will disappear from the LCD
screen.
You can also change the setting in the menu during recording:
CAMERA
DISPLAY SET UP
(
42)
Open the menu and select [DISPLAY SET UP]. Select [TV SCREEN], set it to
[OFF] and close the menu.
144
PLAY (VCR)
DISPLAYS•••••ON
Playing Back on a TV Screen (
PLAY (VCR)
PLAY (VCR)
TV SCREEN••••ON
CARD CAMERA
CARD CAMERA
CARD CAMERA
CARD PLAY (VCR)
39).
CARD PLAY (VCR)
SELF T.
SEARCH SELECT
12bit
MIX BALANCE
TV SCREEN
AUDIO OUT
ST-1
ST-2
CARD
DATA CODE
PLAY MODE
D.EFFECTS
ON/OFF
CARD
SLIDE SHOW
CARD PLAY (VCR)
Advertisement
Table of Contents
