Subscribe to Our Youtube Channel
Related Manuals for USX-MOUNT XMS008-01
Summary of Contents for USX-MOUNT XMS008-01
- Page 1 XMS008-01 INSTRUCTION MANUAL For 10-26" TV If you have any questions along the way, just give us a call 1-800-460-0956 or message to us. We’re ready to help! USA-B0...
- Page 2 Before getting started, let’s check below lists to make sure it is just right for you! MAX:100mm/3.94" (MIN:50mm/1.97") Check your TV VESA is within No? This mount is NOT compatible. Min and Max size MAX:100mm/3.94" (MIN:50mm/1.97") Yes? Perfect ! CAUTION: DO NOT exceed the maximum weight Does your TV No? Perfect –...
- Page 3 TV INTERFACE 100mm [3.94in] 50mm 100mm [1.97in] [3.94in] 50mm [1.97in] WALL PLATE TOP VIEW - EXTENDED SIDE VIEW - RETRACTED 40mm [1.57in] +5° 326mm -15° 150mm [12.83in] [5.91in] 7.5mm [0.30in] FULLY ASSEMBLED MOUNT TOP VIEW - RETRACTED TOP VIEW - EXTENDED 75mm [2.95in] 170mm...
- Page 4 WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service.
- Page 5 Parts and Hardware for STEP 2 Wall Plate Unit Lag Bolt Allen Key Velcro x3 Disassemble this whole mount into Two Pieces by removing bolts ①.(Remember to keep bolts for next step use) Wall Plate one turn TV Plate ①...
- Page 6 1-2 Select TV Screws...
- Page 7 1-4 Attach the TV Plate 1-3 Need Spacer? 100mm No, choose suitable screws and washers. 75mm 50mm ① 50X50 75mm ② 75X75 50mm 100mm ③ 100X100 Yes, choose suitable screws, washers and spacers. Tips: If you need to combine M6(c/f) screws with 2.5mm spacers(g), you have to remove the inner circle of spacers.
- Page 8 Wooden Board Min. 0.5"(12.7mm) Wooden Board Warning: Please double check the thickness of your RV wooden board to make sure it is above 0.5”. Remind: This TV mount is designed for RV use. We only include the wall mounting hardware for RV wooden board installation.
- Page 9 CAUTION: Avoid potential personal injury or property damage! All 4 lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step. To prevent the TV falling down, please make sure you install this TV mount in the right up direction as below figure shown.
- Page 10 Before hanging TV, please try to pull the mount to make sure that it has been assembled on the wooden board tightly.
- Page 11 Hang pre-assembled TV unit on the wall plate and fix them using screws ①. ①...
- Page 12 5-1 TV leveling adjustment (±4°): Loosen 2 leveling bolts on the rear of TV plate by maximum 2 turns, adjust to level and retighten to secure. Loosen Tighten Loosen Tighten...
- Page 13 5-2 Tilting angle adjustment (+5°/-15°) ： Loosen handle and tilting bolt, adjust TV to your desired position, then tighten handle and tilting bolt. Put the handle level when finish. +5° Tilting bolts Tighten Loosen +5° -15° -15° Tilting bolts Tighten Loosen...
- Page 14 Push your TV to the wall. Pull down the strap and lock the TV plate to the wall plate. Important ! Make sure to stow the TV and fully lock the mount in place before your RV moves. Stow Pull down the straps Pull out Pull down...
- Page 15 Cables manage: Manage TV cables orderly and guide them through the velcros. Velcro...
Need help?
Do you have a question about the XMS008-01 and is the answer not in the manual?
Questions and answers