Page 1
Installation and Operation Manual Installation and Operation Manual...
Page 2
If too dry, the tissue won’t glide easily, and may damage the surface. If you require technical advice or assistance, contact your nearest samyung enc office or visit our website, www.samyungenc.com. Installation and Operation Manual...
GPS Antenna Stand type Support 57745 GPS Antenna + 1-2 Specification SAN-60-10 GPS Antenna Support Fuse 527-2002-1Q [N430, NF430] P7 or P23 P7 or P23 GENERAL Category Detail Size 129 mm(H) x 183 mm(W) x 113.5 mm(D) 1-4 Optional Accessories 4.3 “Diagonal, TFT color, 480 x 272 pixels...
2 Getting Started 2-2 Keys 2-1 Installation The chart plotter is supplied with bracket and flush mounting kit. You can choose a method of ESC – Exit from menu and return to previous installation according to your preference. menu or window. In chart window, it 2-1-1 Bracket Mounting places own ship at center.
Data bar displays useful navigation Selecting the Data bar size information at the top of the display. 1 Press and select Data bar. 2-3 NAVIONICS SD Card 2 Select Data bar then Data bar size. 3 Select the desired size of data bar. This section provides instructions for inserting [Large] and removing NAVIONICS SD card...
2-7 Compass 2-8 Multi Window Display The chart plotter computes compass direction To turn the compass off or on: The Chart plotter can display up to four from the constellation of GPS satellites. For 1 Press and select Data bar. windows at the same time.
3 General Operation Active Window To distinguish an active window among windows, an orange border indicates the active window. To change the active window to the next window, press and hold 3-1 Power on and off Manual power on Manual power off Press and hold until the display shows Press and hold...
Highway 3-3 The page window Sonar Chart Press to show the page window and select a function icon you want to display. Note 1 Some function icons require optional units and connected sensors. 2 If you press one more time in the main window, favorite window is displayed.
3-4-2 Latitude and longitude 3-4 Chart Latitude and longitude coordinates define a Info position on earth and can be displayed in Latitude: Angular distance North or South of The Chart window mainly shows all relevant navigation data available on your preloaded maps, data bar.
3-4-6 S-Map search This function is available when NAVIONICS 3-4-9 Going to a waypoint or to a point on the chart SD card is inserted and NAVIONICS is A waypoint is a particular location on a Cancelling navigating selected. voyage whether it is a starting, intermediate 1 Press and select the Chart icon.
3-4-11 Distance and bearing calculator 3-4-14 Tracks & Log Settings in the chart window The unit can show the bearing and the length Saving as a route For tracks & log setting in the chart of leg and the total distance of legs. 1 Once you set all the legs, press window, press and hold .
3-5-3 Single and Dual frequency fish finding 3-5 Sonar Sonar frequencies The display is useful for comparing the same The unit has dual frequency, 200kHz and picture with two different frequencies. It is available to use a sonar function when this equipment is connected to an depth 50kHz to detect various bottom conditions.
3-5-6 Sonar window display [When the set depth is too low] [When the set depth is too high] Five sonar display windows are available and Split A-Scope: Display Sonar history and each display window has unique echo strength (see section 3-5-11) characteristics.
3-5-8 Split zoom and Full Screen zoom 3-5-10 Split 50/200 Split zoom Bottom lock The 50 kHz display appears on the left and Split zoom mode expands selected area of If Bottom lock is on, the zoom depth (the the 200 kHz appears on the right. This dual the single frequency by VRM(Variable Range depth of the zoom section) is adjusted frequency display is very useful for...
3-6 Highway 3-8 Waypoints The Highway window shows a 3D view of A waypoint is a particular location on a the vessel traveling through the water when voyage whether it is a starting, intermediate navigating to a destination point. or destination point. A waypoint is the simplest piece of information the unit To go to the Highway window, press requires to get you to a destination in the...
3-8-4 Deleting a waypoint 3-9 Routes To delete a waypoint from the chart Deleting a waypoint from the waypoints window window A trip from one place to another often 1 Move the cursor to the waypoint you want 1 Move cursor key to highlight a waypoint involves several course changes, requiring a to delete.
3-9-2 Managing a route from the route window 3-10 Satellites Creating a rout from the route window Deleting a waypoint in the waypoint list 1 To go to the Route window, press 1 Highlight a waypoint you want to delete in and select the Route icon the waypoint list.
3-11 Tides 3-12 AIS The Tides window is useful for boaters that The tides window shows data for the AIS is an Automatic Identification System for identification and localization of boat. AIS provide a means for boats to exchange and share boat data including identification, position, course, are concerned about the height of the water chosen date or by fisherman that wish to know the tide...
3-13 DSC [AIS Vessel Information -1] AIS Vessel List] This feature requires connection to optional DSC VHF radio. DSC window shows the distress and poll information received from other vessel through DSC VHF radio. 1 Press and Hold Menu, then select the system configuration. 2 Select the optional components and select DSC 3 Press ESC and press DISPLAY from the top page then select DSC.
3-13-2 Poll Poll Deleting a poll 3-14 NAVTEX A compatible radio with the unit can request 1 Highlight a received distress call you want to delete. the position of other DSC VHF radio equipped NAVTEX is an international automated direct Deleting a message 2 Press and select Delete.
4 Settings 4-2 Chart Settings To go to the chart settings: The system menu mainly consists of settings which do not require frequent adjustment. 1 Press and hold To go to system menu, press and hold then select the icon you want. 2 Select the chart icon.
4-2-1 Rotation These objects have been obtained from other 4-2-7 Map shift Sounding min: Set the minimum depth limit Three types of display presentations are sources and then merged to the electronic to show depth sounding, bathymetric lines Sometimes current position of own ship does provided.
4-3 GPS Settings 4-4 Track & Log Settings To go to the GPS settings: To go to the tracking and long settings: 1 Press and hold 1 Press and hold 2 Select the GPS icon. 2 Select the track & log icon. When the GPS device is connected properly, the GPS settings provide the access to GPS functions and features connected with the satellites information used for further navigation The unit has the capability to store 10 individual tracks and record up to 15,000 track points.
4-5-4 Format 4-5-5 Screen Snap Shot Erase all data in the user card. Format the To take the snap shot of current screen, press 4-5 Memory Settings user card before using it. twice. To save the captured image, press and select Save or Save all to save To go to the memory settings: the captured images on the user card.
4-6-1 Display Filter 4-7 Alarm Settings There are a couple of methods to filter AIS Filter by speed : Vessels with speed below vessel in this unit as below. the set value are filtered. Press long then select Alarms:: Filter by Type : The type of vessel which is Show Dangerous Only : When this option selected will not be displayed on the chart.
Correct installation is important to the performance of the unit. It is vital to read the entire installation section of this manual and the documentation that comes with the antenna and any other units before starting installation. For further information, please contact Samyung ENC. 5-1 Options and Accessories Optional sensors and instruments •...
Such a DGPS antenna has both a Power / Data Cable GPS receiver and a beacon receiver, and it For more information, contact Samyung ENC. automatically applies the beacon correction PIN No : 5 to the GPS position.
Thank you for purchasing an SAMYUNG ENC product. This product has been Power / Data Cable Power / Data Cable thoroughly checked and is covered by the Samyung ENC’s warranty for defects in materials and workmanship under normal use from the date of purchase. PIN No : 1...
Page 31
Installation and Operation Manual Installation and Operation Manual...
Need help?
Do you have a question about the N430 and is the answer not in the manual?
Questions and answers
How to change the date for gps samyung nf5100.