Table of Contents

Advertisement

Quick Links

2
User Guide
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NF120 and is the answer not in the manual?

Questions and answers

Summary of Contents for Samyung ENC NF120

  • Page 1 User Guide...
  • Page 2 If too dry, the tissue won’t glide easily, and may damage the surface. If you require technical advice or assistance, contact your nearest samyung enc office or visit our website, www.samyungenc.com. User Guide...
  • Page 3: Table Of Contents

    1 Introduction........... 9 3-6-10 Split 50/200 ..................39 3-6-11Split A-Scope ..................39 1-1 General Information ..................9 1-2 Specification ......................3-7 Highway ..................... 40 1-3 Components ..................... 12 3-8 Data ......................40 1-4 Optional Component ..................12 3-9 Waypoints ....................41 2 Getting Started ..........13 3-9-1 Creating a new waypoint ..............41 3-9-2 Moving a waypoint ................41 2-1 Installation.......................
  • Page 4 4-2-8 Restore default ..................56 4-9-2 Waypoint ..................65 4-9-3 GPS ....................65 4-3 Sonar settings ................... 57 4-9-4 Video....................65 4-3-1 Frequency ..................57 4-9-5 Units....................65 4-3-2 Palette ....................57 4-9-6 Comms.....................65 4-3-3 Scroll speed..................57 4-9-7 Calibrate ...................65 4-3-4 Digit size ...................57 4-9-8 Time....................65 4-3-5 Fish ....................57 4-9-9 Cursor Size..................65 4-3-6 Interfernce filter ................57...
  • Page 5: Introduction

    Range : 0° ~ 37.7°C (32°F ~ 99.9°F) devices with NMEA0183 and NMEA2000 interface and display information. Following are the examples. 1-2 Specification [N120] General Category Detail [NF120] 270mm(H) x 396mm(W) x 90mm(D) Size GENERAL Display 12.1 inch, TFT color, 1024X768 pixel Category Detail Supply Voltage...
  • Page 6: Components

    APA, APB, BWR, GGA, GLL, GSA, GSV, RMB, RMC, VTG, XTE, Part Number List DBT, DPT, MTW, VHW, XDR NMEA 2000 Output +++Water Speed(128259), Water depth(128267), XTE(129283), NF120 N120 NAV. data(129284), NAV. data(129285), COG & SOG(129026), Display NF120-K N120-K GNSS position(129029), Water temp.(130310)
  • Page 7: Getting Started

    2-2 Buttons 2 Getting Started [FRONT] 2-1 Installation The chart plotter is supplied with bracket and flush mounting kit. You can choose a method of installation according to your preference. 2-1-1 Bracket Mounting Find the appropriate place to install considering GPS Chart plotter’s weight and user Encoder –...
  • Page 8 [REM-3D] ① ② ④ ⑥ ③ ⑤ ⑦ ⑧ ① Press F1 once goes to Plotter à press it consecutively and will show Plotter and low frequencyà press again and will show plotter and high frequencyà press again and will show plotter and dual frequencyà...
  • Page 9: Navionics Sd Card, Usb

    2-3 NAVIONICS SD Card, USB 2-5 Simulation This section explains how to insert and Simulation Mode is great for practicing the remove the NAVIONICS SD Card and USB. actual use of a product when the satellites signals and internal alarms are not available. Turn off the simulation Inserting SD Card Under the simulation mode, the unit ignores...
  • Page 10: Compass

    2-7 Compass 2-8 Multi Window Display The chart plotter computes compass direction To turn the compass off and on Chart plotter can display up to four windows Changing window size from the constellation of GPS satellites. It is 1 Press and select Data bar.
  • Page 11: User Line Drawing

    2-9 User Line Drawing Active window The user may draw a line or set the Mark Up to 999 Lines, marks, characters could be If more than one windows are displayed, the active window has blue border around it. If you using this function.
  • Page 12: General Operation

    3 General Operation 3-3 Main window To display the one window from the main page, press and select function you wish to 3-1 Power on and off show. Power on Power off Press and hold until the display shows Press and hold .
  • Page 13: Chart

    Echo Sounder Chart Video 3-4 Chart Chart window shows all the navigational relevant data of S-MAP and NAVIONICS (buoys, lights, cables, depth sounding, marinas, tide station) 3-4-1 Chart Window To go to the Chart window: ① Data bar. You may change the data Press and select Chart icon.
  • Page 14: Latitude And Longitude

    3-4-2 Latitude and Longitude Latitude and longitude coordinates define 3-4-5 SAMYUNG Map Search the position on earth and can be displayed on Latitude: The angular distance north or south data bar. from the equator of a point on the earth’s This function is available when it has been In the data bar, vessel’s position will show as surface, measured on the meridian of the...
  • Page 15: Going To A Waypoint Or To A Point On The Chart

    3-4-10 Distance and bearing calculator Saving route The unit can show the bearing and the length 3-4-8 Going to a waypoint or to a point on the chart of leg and the total distance of legs. 1 Set all the legs then press and select A waypoint is a particular location on a Cancelling Navigating...
  • Page 16: Finding A Chart Symbol

    3-4-12 Finding a chart symbol 3-4-14 3D MAP From the chart, when you hold down to Pressing the shows the menu to allow ▣ When you wish to create mark, adjust , the Mark window will show. you to set 3D map color and shape, Press down WPT from From Mark: select the symbol of mark Plotter display.
  • Page 17: Sonar

    3-5-1 Option Movie option External video option When you press , option displays 3-6 Sonar When you press option displays. Open: Opens the file from SD card and Input: You may select from composite-1, USB.(shortcut: It is possible to use the Sonar function when it is connected to the transducer. Play: Play the file (shortcut: composite-2, S-VIDEO.
  • Page 18: Single Or Dual Frequency Fish Finding

    3-6-3 Single or Dual Frequency Fish finding [When the set depth is too low] [When the set depth is too high] Sonar frequencies The display is useful for comparing the same The unit has dual frequency, 200kHz and picture with two different frequencies. 50kHz to detect various bottom conditions.
  • Page 19: Sonar Window Display

    3-6-8 Split zoom and Full Screen zoom 3-6-6 Sonar window display Split zoom Bottom lock Split zoom mode expands selected area of If Bottom lock is on, the zoom depth (the Five sonar display windows are available and Split A-Scope: Display Sonar history and the single frequency by VRM(Variable Range depth of the zoom section) is adjusted each display window has unique...
  • Page 20: Split 50/200

    3-6-10 Split 50/200 3-7 Highway The 50 kHz display appears on the left and The Highway window shows a 3D view of the 200 kHz appears on the right. This dual the vessel traveling through the water when frequency display is very useful for navigating to a destination point.
  • Page 21: Waypoints

    to edit. (If you move the cursor on the 2 Press and select Edit. waypoint correctly, waypoint information 3 Edit waypoint data as you need and press 3-9 Waypoints will be displayed at the bottom left) 2 Press and select Edit. A waypoint is a particular location on a 3 Edit waypoint data as you need and press voyage whether it is a starting,...
  • Page 22: Sort Waypoints

    3-10 Routes A trip from one place to another often 3-9-6 Sort Waypoints 3-9-7 Deleting all waypoints involves several course changes, requiring a series of waypoints which you navigate to, one after another. The sequence of To change the order of displayed waypoint 1 In the waypoints window, press waypoints leading to the final destination is list:...
  • Page 23: Managing A Route From The Route Window

    3-10-2 Managing a route from the route window 3-11 Satellites Creating a rout from the route window Deleting a waypoint in the waypoint list 1 To go to the Route window, press 1 Highlight a waypoint you want to delete in and select the Route icon the waypoint list.
  • Page 24: Tides

    3-12 Tides 3-13 AIS The Tides window is useful for boaters that The tides window shows data for the AIS is an Automatic Identification System for identification and localization of boat. AIS provide chosen date are concerned about the height of the water a means for boats to exchange and share boat data including identification, position, course, or by fisherman that wish to know the tide etc.
  • Page 25: Dsc

    3-14 DSC This feature requires connection to optional DSC VHF radio. [AIS Vessel Information -1] [AIS Vessel List] DSC window shows the distress and poll information received from other vessel through DSC VHF radio. 1 Press and Hold Menu, then select the system configuration. 2 Select the optional components and select DSC 3 Press , press...
  • Page 26: Poll

    3-14-2 Poll Poll Deleting a poll 3-15 Navtex A compatible radio with the unit can request 1 Highlight a received distress call you want the position of other DSC VHF radio equipped to delete. NAVTEX is an international automated direct Deleting a message vessels around its position.
  • Page 27: Settings

    4 Settings 4-2 Chart settings To go to the chart settings: The system menu mainly consists of settings which do not require frequent adjustment. 1 Press and hold To go to system menu, press and hold then select the icon you want. 2 Select the chart icon.
  • Page 28: Rotation

    Projected course: Display the Projected 4-2-1 Rotation on or off 4-2-7 Map shift course in given set time. Restricted Area: Turns the displaying of Three types of display presentations are Sometimes current position of own ship does CDI scale: Set CDI (Course Deviation Restricted area on or off provided.
  • Page 29 4-3 Sonar settings 4-4 GPS Settings Sonar feature requires a connection to depth transducer. To go to the Sonar settings: To go to the GPS settings: 1 Press and hold 1 Press and hold 2 Select the sonar icon. 2 Select the GPS icon. 4-3-1 Frequency 4-3-6 Interfernce filter You can select a sonar frequency among 200...
  • Page 30 4-6 Memory Settings 4-5 Track & Log Settings To go to the memory settings: 1 Press and hold To go to the tracking and long settings: 1 Press and hold 2 Select the Memory icon. 2 Select the track & log icon. A user card is an option SD card which you need to purchase additionally.
  • Page 31 4-6-4 Format 4-6-5 Screen Snap Shot 4-7-1 Display Filter Erase all data in the user card. Format the To take the snap shot of current screen, press Filter by speed : Vessels with speed below There are a couple of methods to filter AIS user card before using it.
  • Page 32 4-9 Other settings 4-8 Alarm Settings then select Others: Press long Press long then select Alarms: A warning message with beep sound is displayed when an alarm condition is met by user setting. Press to clear the alarm. However, the alarm will be displayed again when the alarm condition occurs again.
  • Page 33: Optional Parts

    4-9-1 Simulate Simulate :Turn the simulate mode on or off. 4-9-8 Time 5 CONNECTIONS Mode : See 2-5 Simulate Mode. Local offset : The time information supplied Speed : The simulated boat speed to use. by the GPS satellites is in UTC (Universal Course : The simulated course over ground.
  • Page 34 [DATA] Number Description of pin DGPS_OUT [Number of Connector Pin] +12V +12V GND CAN_H CAN_L CAN_GND DGPS_GND DGPS_IN [MEDIA] Number Description of pin +12V_GND AUDIO_GND AUDIO_IN_R ETHERNET MEDIA DATA SONAR REMOTE POWER AUDIO_OUT_L AUDIO_GND [POWER & DATA] +12V VIDEO_GND Number of Pin Color Description VIDEO_GND...
  • Page 35: Power Supply & Data Cable

    5-5 GPS ANTENNA 5-2 CONNECTION Selection of antenna GPS Chart plotter has the connection device to connect with the NMEA equipment like power Install one of the GPS antennas from below. supply, GPS antenna, AIS receiver, auto pilot device and digital equipment. 5-5-1 External antenna *Warning: Check that the power supply cable does not get connected to the REMOTE Connector or the DATA connector.
  • Page 36: Data

    • The equipment can receive information on be certain about NMEA data. 5-7-1 DGPS/NMEA ANTENNA 5-7-2 NMEA2000 paddlewheel, speed, temperature, depth of You can connect several equipment to one NMEA 2000 regulation has been implemented water from the optional equipment. external GPS by receiving the GPS data in the for communication between navigational •...
  • Page 37: Media

    5-8 MEDIA Menu Tree You may use CCTV, S-VIDEO, external speaker, microphone Main menu 1. Introduction 1-1 General Information 1-2 Specification Pin No. Details 1-3 Components VIDEO_GND 1-4 Optional accessories VIDEO_GND VIDEO_Y 2. Getting Started 2-1 Installation 2-1-1 Bracket mounting VIDEO_C 2-2 Button S-VIDEO PIN MAP...
  • Page 38 4-3 Sonar setting 4-3-1 Frequency 3-7 Highway 4-3-2 Palette 3-8 Data 4-3-3 Scroll Speed 3-9 Waypoints 3-9-1 Creating new waypoint 4-3-4 Font Size 3-9-2 Change the waypoint 4-3-5 Fish 3-9-3 Edit the waypoint 4-3-6 Advance setting 3-9-4 Delete waypoint 4-3-7 Restore default 3-9-5 Find waypoint 3-9-6 Sort Waypoint 4-4 GPS Setting...
  • Page 39 System Maintenance In order to maintain the full function of equipment, regular maintenance and repair is 4-9 Other setting 4-9-1 simulation compulsory. This includes regular checkup, software upgrade, and should at least include 4-9-2 Waypoint the below chart. 4-9-3 GPS Item Contents 4-9-4 Units...
  • Page 40 Diagnosis The chart explains the general symptoms of breakdown and solutions to it. N120/NF120 Installation User should not disassemble equipment. The attempt may degrade the function of equipment or shorten the life of it. Therefore you take it to the professional engineer (A/S 1.
  • Page 41 1 YEAR WARRANTY Thank you for purchasing an SAMYUNG ENC product. This product has been thoroughly checked and is covered by the Samyung ENC’s warranty for defects in materials and workmanship under normal use from the date of purchase. This warranty provides for the free repair or replacement of defective parts from our Samyung ENC authorized dealer.
  • Page 42 User Guide...

This manual is also suitable for:

N120

Table of Contents