Preparation
Pressure Relief Procedure
Follow the Pressure Relief
Procedure whenever you see this
symbol.
This equipment stays pressurized until
pressure is manually relieved. To help
prevent serious injury from pressurized
fluid or splashed fluid follow the Pressure
Relief Procedure whenever sprayer is
stopped and before sprayer is cleaned or
checked, and before equipment is
serviced.
1.
Turn ON/OFF switch to the OFF
position. Wait 7 seconds for power to
dissipate.
ti27923a
3A7027A
2.
Unplug sprayer.
3.
Turn fluid regulator all the way down.
4.
Aim gun into hopper or waste bucket and
trigger the gun until all air and material
pressure is relieved.
Preparation
5