Table of Contents
Advertisement
Electrical connection
Water supply pressure
Water supply
Capacity
1) Refer to the rating plate for other values.
14. INSTALLATION
14.1 Fitting under a counter
The plinth of a freestanding appliance is
not adjustable. Do not remove the work-
top if you want to use the appliance as a
freestanding unit.
It is not necessary to remove the work-
top when installing under a standard
kitchen counter. Only remove the work-
top when installing the appliance under a
close fitting sink unit or kitchen counter
(820 mm).
Put the appliance adjacent to a water tap
and a water drain.
Make sure that the dimensions of the
recess agree with the dimensions in the
picture.
min 570 mm
820 mm
600 mm
Removing the work-top
1. Remove the rear screws (1).
Voltage (V)
1)
Frequency (Hz)
Wattage (W)
bar (minimum and maximum)
kPa (minimum and maximum)
Cold water
Place settings
200 - 240
50 / 60
1550-2200
0.5 - 8
50 - 800
min 5 °C
14
1
2. Pull the work-top from behind (2).
3. Lift the work-top and move it from
the front slots (3/4).
3
4. Level the appliance using the
adjustable feet.
5. Install the appliance under the
kitchen counter.
Adjusting the level of the
appliance
A correct adjustment of the level of the
appliance allows the door to close and
seal correctly.
ENGLISH
21
2
4
Advertisement
Table of Contents
