Table of Contents
Advertisement
CAUTION!
If children have access to the
appliance, it is advised to
deactivate AirDry as opening
the door may pose a danger.
How to deactivate AirDry
Make sure the appliance is in user mode.
1. Press Delay.
7. OPTIONS
Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
The Option button toggles
between the available
options and their possible
combinations.
Not all options are
compatible with each other.
If you select non compatible
options, the appliance
automatically deactivates
one or more of them. Only
the indicators of the still
active options are on.
If an option is not applicable
to a programme, the related
indicator is off or it flashes
quickly for a few seconds
and then goes out.
Activating options can affect
the water and energy
consumption as well as the
programme duration.
7.1 XtraDry
Activate this option to boost the drying
performance.
XtraDry is a permanent option for all
programmes other than
automatically activated in next cycles.
• The indicators
• The indicator
• The display shows the current
2. Press Delay to change the setting.
3. Press on/off to confirm the setting.
This configuration can be changed at any
time.
Activating XtraDry deactivates TimeSaver
and vice versa.
How to activate XtraDry
Press Option until the indicator
If the option is not applicable to the
programme, the related indicator is off
or it flashes quickly for a few seconds and
then goes out.
The display shows the updated
programme duration.
7.2 TimeSaver
The TimeSaver allows to reduce the
duration of a selected programme by
approximately 50%.
The washing results are the same as with
the normal programme duration. The
drying results can decrease.
This option increases the pressure and
the temperature of the water. The
washing and the drying phases are
shorter.
By default, TimeSaver is off, but it is
possible to activate it manually. This
option cannot be combined with
XtraDry.
. It is
are off.
still flashes.
setting.
–
= AirDry is deactivated.
–
= AirDry is activated.
Every time
activated, XtraDry is off and
needs to be chosen
manually.
ENGLISH
11
and
is
is on.
Advertisement
Table of Contents
