Table of Contents
Advertisement
Installation
Installation
To avoid serious injury or machine damage, all
electrical connections need to be done by a qualified
electrician familiar with local codes.
Power Requirements
Ensure that the electrical panel located within the Power Distribution Box has the correct circuit breakers for installing
the kit. If the current Power Distribution Box does not have this configuration, contact your local distributor inquiring
about a Power Distribution Box upgrade kit.
Grounding
Ground the system as instructed within this manual.
The equipment must be grounded to reduce the risk
of static sparking and electric shock. Electric or static
sparking can cause fumes to ignite or explode.
Improper grounding can cause electric shock.
Grounding provides an escape wire for the electric
current.
6
Setup
1. Access the Platen
a. Perform Remove Drum Procedure found in
VPM Instructions manuals.
b. Perform Shutdown Procedure found in VPM
Instructions manuals.
c. Thoroughly clean all material that may be found
on the top of the platen.
d. Turn off all sources of power to the machine.
3A1937C
Advertisement
Table of Contents
