Table of Contents
Advertisement
C - Compensation: Flattens the image to account for variations in
illumination across the image.
0C Compensation disabled (default)
1C Compensation enabled
D - Pixel Depth: Indicates the number of bits per pixel in the
transmitted image (KIM or BMP format only).
8D 8 bits per pixel, grayscale image (default)
1D 1 bit per pixel, black and white image
E - Edge Sharpen: Causes the transmitted image to be convolved
with an edge sharpening filter. Entering a 23E gives the sharpest
edges, but also increases noise in the image.
0E Don't sharpen image (default)
14E Apply edge sharpen for typical image
ne Apply edge sharpen using strength n (n = 1-24)
F - File Format: Indicates the desired format for the image.
0F KIM format
1F TIFF binary
2F TIFF binary group 4, compressed
3F TIFF grayscale
4F Uncompressed binary (upper left to lower right, 1 pixel/bit, 0
padded end of line)
5F Uncompressed grayscale (upper left to lower right, bitmap
format)
6F JPEG image (default)
8F BMP format (lower right to upper left, uncompressed)
H - Histogram Stretch: Increases the contrast of the transmitted
image. Not available with some image formats.
0H No stretch (default)
1H Histogram stretch
I - Invert Image: Used to rotate the image around the X or Y axis
in fixed mount applications where the imager is mounted upside
down.
1IX Invert around the X axis (flips picture upside down)
1IY Invert around the Y axis (flips picture left to right)
IF - Fly Spec (Noise Reduction): Used to reduce salt and pepper
114
Advertisement
Table of Contents
