Utilities - Argox ArgoxScan 9500 Manual

Utilities

To Add a Test Code I.D. Prefix to All Symbologies
This selection allows you to turn on transmission of a Code I.D.
before the decoded symbology. This action first clears all current
prefixes, then programs a Code I.D. prefix for all symbologies.
This is a temporary setting that will be removed when the unit is
power cycled.
Show Data Format
Scan the bar code below to show current data format settings.
Show Serial Number
Scan the bar code below to show the scanner t serial number.
Resetting the Standard Product Defaults
If you aren't sure what programming options are in your imager,
or you've changed some options and want the standard product
default settings restored, scan the Standard Product Default
Settings bar code below.
The Menu Commands lists the standard product default settings
for each of the commands
Test Menu
When you scan the Test Menu On code, then scan a programming
code in this manual, the imager displays the content of a
programming code. The programming function will still occur, but
in addition, the content of that programming code is output to the
terminal.
Note: This feature should not be used during normal imager
operation.
138