Safety; Requirements Of Personnel; Working Safely; Breakthrough Protection - AEROCOMPACT CompactFLAT SN10 Assembly Instructions Manual

Table of Contents

Advertisement

Safety

+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
SAFETY
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+

Requirements of personnel

+
+
+
+
+
+
+
+
The person must be physically and mentally fit. Under no circumstances must the installation personnel be
+
+
+
+
under the influence of medication, alcohol or drugs.
+
+
+
+
Persons who are not healthy and fit must not work on roofs.
+
+
+
+
+
+
+
+
Personnel who are in training must only carry out work under the supervision of qualified personnel who
+
+
+
+
are authorized to train personnel.
+
+
+
+
+
+
+
+
+
+
+
+

Working safely

+
+
+
+
+
+
+
+
The company carrying out the installation is responsible for ensuring that the local regulations for work
+
+
+
+
safety and accident prevention are observed.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+

Breakthrough protection

+
+
+
+
+
+
+
+
Roof windows, skylights, large ventilation flaps etc. often cannot withstand the weight or impact of a person.
+
+
+
+
Such objects must be secured in a similar way as the edge of the roof.
+
+
+
+
Corrugated fibre cement roofs can be prone to breakthrough over the entire surface. Define walking routes
+
+
+
+
and secure them with load distribution measures.
+
+
+
+
On roofing or roof structures that do not have sufficient load-bearing capacity (e.g. thin sheets, corrugated
+
+
+
+
fibre cement), always work with load distribution aids.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+

Climbing aids

+
+
+
+
Only use suitable, intact and tested ladders. Set up and secure ladders according to instructions.
+
+
+
+
Separate rules apply to mechanical climbing aids (lifts, lifting platforms, ...).
+
+
+
+
Never use the PV mounting system as a climbing aid.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+

Weather conditions

+
+
+
+
+
+
+
+
In case of unsuitable weather conditions, work on the roof must not be continued any longer than neces-
+
+
+
+
sary - or not started at all.
+
+
+
+
+
+
+
+
Never carry out assembly work in strong winds. Strong wind practices above all exerts enormous forces on
+
+
+
+
the large-area PV modules. There is a risk that a module could be torn off the roof and people could be
+
+
+
+
injured.
+
+
+
+
+
+
+
+
Never work in wet conditions or at temperatures below freezing point. Depending on the roof pitch there is
+
+
+
+
a risk of slipping.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
www.aerocompact.com
+
+
+
+
+
+
+
+
+
+
+
+
8

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CompactFLAT SN10 and is the answer not in the manual?

Questions and answers

Table of Contents