Table of Contents Please Observe the Following ....................3 Emphasized Sections ......................3 For Your Safety ........................3 Unpacking and Inspection ....................4 Items supplied ........................4 Features ..........................4 Usage ............................. 4 Description ........................... 5 Technical Data ..........................6 Installation ............................
Please Observe the Following Emphasized Sections Warning! Refers to safety regulations and requires safety measures that protect the operator or other persons from injury or danger to life. Caution! Emphasizes what must be done or avoided so that the unit or other property is not damaged.
Unpacking and Inspection ® Carefully unpack the Loctite CL36 LED Cure Chamber and examine the items contained in the carton. Inspect the unit for any damage that might have occurred in transit. If such damage has occurred, notify the carrier immediately. Claims for damage must be made by the consignee to the carrier and should be reported to the manufacturer.
Description ® The Loctite CL36 LED Curing Chamber a high-performance LED system for curing UV adhesive. The chamber is a closed system. It is used for applications permitting manual loading of the cure chamber. The chamber offers 405nm LED. There are 2 pcs of 200x200 mm LED floods in one chamber, one on top and one on side.
Technical Data Overall Dimensions, L x H x W (mm) 471.05 x 372 x 573 Cure Chamber Dimensions, L x H x W (mm) 304 x 300 x 255 Weight, lbs. (kg) 110 (50kg) Power Supply 110-240VAC 50/60Hz LED Wavelength 405nm Maximum Intensity 205mW/cm2 @40mm WD...
EMO Button ON/OFF Switch Operation Panel Observation Screen Door Handel Rear Side Panel Power Inlet Power Switch Side LED Flood 10. Top LED Flood 11. Door Switch Do not press door switch any time. 12. Rotary Table 5.2 Electrical Connection Plug the AC power cord into N0.
Operation 6.1 Setup Parameter As below picture, press Setting Locked button on panel, will enter setup page. Click each area to setup each parameter, detail as below: Setup LED power for top flood. The adjust range is 10~100%...
Page 10
Setup timer for timer for top flood. The curing time will be shown as “xx:xx”. Front two means minutes, rear two means second. The max. is 99 minutes and 59 seconds. For example: when you key in “3”, the curing time will be “00:03”, means curing time is 3 seconds. when you key in “30”, the curing time will be “00:30”, means curing time is 30 seconds.
Setup curing time for side flood. Setup rotary table. You will define if the table will rotate during curing or not. Click this button to save and exit. 6.2 Run the Chamber As below picture, click below button (START/STOP) to run the chamber. You also can click the START/STOP button to stop the chamber during curing.
Once curing finish, “Complete” indicator will show as , you will need to open the door, or click two times to recover the statue. 6.3 Pause As below picture, click the PAUSE button to pause during curing. And click “Continue” to back to cure Timer will continue when back from pause.
Press START button twice. curing, indicate Or open door and close it. "Complete" Shutdown machine and wait for LED flood overheat Indicator "UV cooling down. ALARM" LED flood error Contact Henkel service. Care and Maintenance The unit requires no special care and maintenance.
CL36 LED Cure Chamber) (hereafter called “Products”) shall be free from defects in materials and workmanship. Liability for Henkel shall be limited, as its option, to replacing those Products which are shown to be defective in either materials or workmanship or to credit the purchaser the amount of the purchase price thereof (plus freight and insurance charges paid therefor by the user).
Page 18
THIS SECTION SETS FORTH EXCLUSIVELY ALL OF LIABILITY FOR HENKEL TO THE PURCHASER IN CONTRACT, IN TORT OR OTHERWISE IN THE EVENT OF DEFECTIVE PRODUCTS. WITHOUT LIMITATION OF THE FOREGOING, TO THE FULLEST EXTENT POSSIBLE UNDER APPLICABLE LAWS, HENKEL EXPRESSLY DISCLAIMS ANY LIABILITY WHATSOEVER FOR...
Need help?
Do you have a question about the Loctite EQ CL36 LED Cure Chamber and is the answer not in the manual?
Questions and answers