Before You Start; On First-Time Startup - Pioneer AVIC-F160 Owner's Manual

Chapter
03

Before you start

On first-time startup

When you use the navigation system for the
first time, an initial setup process starts auto-
matically. Follow the steps below.
1 Start the engine to boot up the system.
2 Wait approximately 10 seconds, and
then press the MODE button of the AV re-
ceiver.
After a short pause, the navigation splash
screen appears.
3 Set the video output selector switch ac-
cording to your AV receiver.
p If the screen remains black after pressing
the MODE button of the AV receiver, set the
switch to the other side.
= For details, refer to Checking part names
and functions on page 14.
4 Select the language that you want to
use on the screen, then touch [Done].
p Later you can change it in "Regional" set-
tings.
= For details, refer to Customising the regional
settings on page 61.
The navigation system will restart and the
"End User Licence Agreement" screen is dis-
played.
16
Engb
5 Read the terms carefully, checking its
details, and then touch [Accept] if you
agree to the conditions.
The configuration wizard starts.
6 Touch [Next] to continue.
7 Select the language that you want to
use for voice guidance messages, then
touch [Next].
p Later you can change it in "Sound and
Warnings" settings.
= For details, refer to Setting the volume and
the guidance voice for navigation system on
page 55.
8 If needed, modify the time format and
unit settings, then touch [Next].
p Later you can change it in "Regional" set-
tings.
= For details, refer to Customising the regional
settings on page 61.