Advertisement
RB32-VSR
RB32-VSR FEATURES AND BENEFITS
1. Champion's RB32-VSR MiniBrute with variable speed & reverse motor is engineered for drilling holes
and tapping threads.
2. The RB32-VSR features a 0-550 variable speed motor, which can be operated in both forward and
reverse.
3. An optional tapping head unit is available for use with hand taps and spiral point taps. With Champion's
'quick change' tapping head, a variety of tap sizes #0 thru7/8" and 3/8" NPT pipe taps can be run
utilizing the RB32-VSR.
TO ASSEMBLE / CHANGE THE RB32-TAPPER
1. The arbor and arbor support bracket must be removed to assemble the tapper.
2. Align the threaded hole in the tapper with the 1/2-20 thread spindle.
3. Turn clockwise to tighten.
4. To remove the tapper, use the 17mm wrench provided to hold the spindle nut inplace. Use the 7/16"
wrench to hold the flats while turning counter clockwise to loosen.
USING THE RB32-VSR TAPPER
1. Align the tapper collet with the hole on the bottom of the tapper.
2. Push up on one side of tapper, push in collet and let down sides of tapper to lockcollet into place.
3. Align tap with hole in center of the collet. Once aligned, push collet ring in, pushtap into collet and
release center collet ring to lock tap into place.
4. Taps can be run at full speed after developing a comfortable technique. Switch to neutral prior to
reversing taps. This will help prolong the life of the motor.
5. To remove, reverse steps.
RB32-VSR PANEL
3
RB32-VSR VERSATILITY
RB32-VSR WITH TAP
RB32-VSR WITH COMBINATION DRILL & TAP
RB32-VSR WITH TWIST DRILL
MINIBRUTE
OPERATING INSTRUCTIONS
RB32-VSR ADAPTOR OPTIONS
RB334
RB335
RB3212
Arbor
Arbor
Drill Chuck
RB32
Tapper
Advertisement
