Page 2
Технические характеристики, особенности и программного обеспечения могут быть изменены без предварительного уведомления. Для получения самой последней на сегодняшний день руководство по эксплуатации пожалуйста, посетите www.truefitness.com .Для документов на другие языки, пожалуйста, посетите www.truefitness.com/resources/document-library/ Page # 2 of 37 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Page 3
The proud manufacturing tradition of quality and the culture of innovation at TRUE have given rise to a full line of extraordinary cardio and strength equipment. As a result, people all over the world are benefiting from the TRUE experience.
9. If the machine appears damaged or inoperable, contact a facility staff member to place an “OUT OF ORDER, DO NOT USE” sign on the machine until it is repaired. Only use TRUE supplied replacement components to service this machine.
Page 6
3. Install this piece of equipment on a solid level surface that does not deviate more than 1/8” over a 10’ distance (or as defined and required by local building and architectural codes.) 4. TRUE strongly recommends that all equipment be anchored to the floor to prevent movement and increase stability.
Page 7
• Frames and Lifting Arms: Inspect weekly for integrity and function. Replace any component at first signs of wear. Use only TRUE supplied components. 4. Replace any warning label at the first sign of wear. Labels and the facility safety sign may be obtained from TRUE.
Page 8
Be sure all hardware is tight before using the machine. Retain these instructions for future reference. If you have any questions, do not hesitate to contact your TRUE dealer or TRUE Fitness Technology at (800)883-8783 or service@truefitness.com. Page # 8 of 37...
LUBRICATE: Pivot bearings and linear bearings. REPLACE: Cables COMPLIANCES: This equipment complies with all fitness product standards. For a complete list of compliances, please visit www. TrueFitness.com. Page # 9 of 37 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
• For standard 170 lb. stack it is 31 lb/ft (150 kg/m2) • For optional 250 lb. stack it is 36 lb/ft2 (175 kg/m Page # 10 of 37 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
9005BPD000XBK BACK PAD PAD-ST001-00XBK SEAT PAD XL2-00TC001BK FRONT TOP CAP FUS-00MT001BK TOP CAP PAD FUS-00TC004BK TOP CAP FUS-00TC002BK REAR TOP CAP TRXL2-09U500XBK UPRIGHT ASSY Page # 12 of 37 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Route the weight stack cable through the main frame before assembling. Note: Secure weight stack cable ends to ensure no tripping hazards until machine is fully assembled. Page # 14 of 37 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Page 15
UPRIGHT ASSY TRXL2-09MF700XBK ASSY, MAIN FRAME Note: Do not fully tighten main TRXL2-09MF780BK CONNECTING BRACE frame and upright assembly hardware until step 9 (Front Shroud). Page # 15 of 37 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Page 16
LOCK NUT, 3/8”-16 TRXL2-09MF700XBK MAIN FRAME TRXL2-09MF780BK CONNECTING BRACE TRXL2-09MF830BK LEFT PULLEY BRACE TRXL2-09MF820BK RIGHT PULLEY BRACE TRXL2-09MF800BK RIGHT PULLEY FRAME TRXL2-09MF850BK LEFT PULLEY FRAME Page # 16 of 37 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Page 17
SEAT FRAME ADJ PLATE FUS-00GS002 BICYCLE SEAT GAS SPRING TRXL2-15AX502 SEAT AXLE TRXL2-CP502X SEAT ADJ CAP C-911 BH SCREW, 3/8”-16, 3/4” C-754 WASHER, FLAT, 3/8” USS Page # 17 of 37 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Page 18
Step B: Align and connect the gas spring at the point identified in this step. Step C: Reattach the gas spring mounting plate to the seat assembly using the previously identified hardware. Page # 18 of 37 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Page 19
16 WT TOP PLATE below. C-417 HH SCREW, 1/4”-20, 2-1/2” TRXL2-09U500XBK UPRIGHT ASSY Secure the guide rods to the upright assembly using the identified hardware. Page # 19 of 37 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Page 22
C-766A LOCK NUT, 3/8”-16 cable is seated in the pulley TRXL2-09PH500BK DOUBLE PULLEY HOUSING groove. TRXL2-09CB000X WEIGHT STACK CABLE TRXL2-09CB500X PRESS ARMS CABLE Page # 22 of 37 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Page 23
C-627 SH SCREW, 3/8”-16, 2” C-626 SH SCREW, 3/8”-16, 1-3/4” C-754C WASHER, FLAT, 3/8” C-766A LOCK NUT, 3/8”-16 C-1008 SHOULDER SCREW, M10 Page # 23 of 37 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Page 24
C-749 WASHER, LOCK, 3/8” C-628 SH SCREW, 3/8”-16, 2-1/4” the identified hardware. C-631 SH SCREW, 3/8”-16, 3” C-754C WASHER, FLAT, 3/8” PAD-ST001-00XBK SEAT PAD Page # 24 of 37 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Page 25
AXLE COVER (ALUMINUM CAP) C-657A FH SCREW, 3/8”-16, 3/4” main frame using the TRXL2-09PA800XBK LEFT ARM identified hardware. TRXL2-09PA900XBK RIGHT ARM TRXL2-09MF750XBK FRONT FRAME Page # 25 of 37 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Page 26
FRONT SHROUD upright assembly using the identified C-1003 M5 x 15 PHMS hardware. Note: Do not over tighten the screws securing the shroud in place. Page # 26 of 37 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Page 27
FUS-00RS101XBK REAR SHROUD assembly using the identified hardware. C-1003 M5 x 16 PHMS FUS-00TC002BK REAR TOP CAP C-1004 M6X60 PHMS FUS-00TC001BK FRONT TOP CAP Page # 27 of 37 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Page 28
WT LABEL 250 LB Note: Select the appropriate weight stack label based on your weight stack selection (standard 170 lbs. or optional 250 lbs.). Page # 28 of 37 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
The following items are critical to the safety of users and maintenance staff as well as ensuring the optimum performance of the machines. These inspections should be performed each day before the equipment is subject to use. TRUE Fitness is not responsible for performing or scheduling regular maintenance or inspections.
CAUTION: Do not use any acidic cleaners. Doing so will weaken the paint or powder coatings and may void the TRUE Fitness Warranty. Never pour or spray liquids on any part of the equipment. Allow the equipment to dry completely before using.
If any of these conditions are apparent, the machine should immediately be taken out of service and repaired. Be sure to use only cables supplied by TRUE Fitness. DO NOT use cables that have fittings attached with hand- crimp tools.
Page 32
Ensure that the snap-link opens and closes easily and is fully engaged when closed. Replace the snap-link as needed. Page # 32 of 37 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com Truefitness.com / 800.426.6570 / 636.272.7100...
HOURS OF OPERATION: 8:30 A.M. - 5:00 P.M. CST E-MAIL: service@truefitness.com CONTACTING SALES: Interested in TRUE products? Please contact us with any sales or product inquires so that we may direct you to the appropriate sales representative to answer your questions. TRUE FITNESS HOME OFFICE 865 HOFF ROAD ST.
Obvious damage to external packaging / internal product. Please refuse the shipment and it will be returned to TRUE Fitness by the carrier. Contact the TRUE Fitness customer support team by calling 800.883.8783 or sales support team by calling 800.426.6570 Monday-Friday during normal hours of operation to notify us that the shipment has been refused.
Hours of operation 8:30am - 5:00 pm CST workmanship for a 10 years. The frame is warranted for labor and freight (for parts shipped from TRUE) for one year from date of purchase. * This limited warranty on structural frame does not include paint or coatings.
Page 36
Product, this Limited Warranty will be void unless the written authorization The Fuse XL-0900 comes with one serial number on the base of of TRUE is first obtained). the machine. Please write down your serial number below and 5.
Page 37
If you prefer to mail your warranty card, have the owner of the product complete the information below and return it to TRUE Fitness within 30 days from the date of equipment installation.