Page 2
Технические характеристики, особенности и программного обеспечения могут быть изменены без предварительного уведомления. Для получения самой последней на сегодняшний день руководство по эксплуатации пожалуйста, посетите www.truefitness.com .Для документов на другие языки, пожалуйста, посетите www.truefitness.com/resources/document-library/ Page # 2 of 34 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Page 3
The proud manufacturing tradition of quality and the culture of innovation at TRUE have given rise to a full line of extraordinary cardio and strength equipment. As a result, people all over the world are benefiting from the TRUE experience.
9. If the machine appears damaged or inoperable, contact a facility staff member to place an “OUT OF ORDER, DO NOT USE” sign on the machine until it is repaired. Only use TRUE supplied replacement components to service this machine.
Page 6
3. Install this piece of equipment on a solid level surface that does not deviate more than 1/8” over a 10’ distance (or as defined and required by local building and architectural codes.) 4. TRUE strongly recommends that all equipment be anchored to the floor to prevent movement and increase stability.
Page 7
• Frames and Lifting Arms: Inspect weekly for integrity and function. Replace any component at first signs of wear. Use only TRUE supplied components. 4. Replace any warning label at the first sign of wear. Labels and the facility safety sign may be obtained from TRUE.
Page 8
Be sure all hardware is tight before using the machine. Retain these instructions for future reference. If you have any questions, do not hesitate to contact your TRUE dealer or TRUE Fitness Technology at (800)883-8783 or service@truefitness.com. Page # 8 of 34...
LUBRICATE: Pivot bearings and linear bearings. REPLACE: Cables COMPLIANCES: This equipment complies with all fitness product standards. For a complete list of compliances, please visit www. TrueFitness.com. Page # 9 of 34 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
• For standard 170 lb. stack it is 39 lb/ft (192 kg/m2) • For optional 250 lb. stack it is 46 lb/ft2 (224 kg/m Page # 10 of 34 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
9005BPD000XBK BACK PAD PAD-ST001-00XBK SEAT PAD XL2-00TC001BK FRONT TOP CAP FUS-00MT001BK TOP CAP PAD FUS-00TC004BK TOP CAP FUS-00TC002BK REAR TOP CAP TRXL2-07U500XBK UPRIGHT ASSY Page # 12 of 34 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Route the weight stack cable through the main frame before assembling. Note: Secure weight stack cable ends to ensure no tripping hazards until machine is fully assembled. Page # 14 of 34 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Page 15
Note: Do not fully tighten main C-639 SH SCREW, 3/8”-16, 4-1/4” frame and upright assembly C-622 SH SCREW, 3/8”-16, 3/4” hardware until step 8 (Front Shroud). Page # 15 of 34 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Page 16
SEAT FRAME SIDE PLATE, BIASED TRXL2-15SF513BK GAS SPRING MTG PLATE FUS-00GS002 BICYCLE SEAT GAS SPRING TRXL2-00SF500XBK SEAT FRAME TRXL2-CP502X SEAT ADJ CAP C-731C 5/16”-18 LOCKNUT Page # 16 of 34 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Page 17
Step B: Align and connect the gas spring at the point identified in this step. Step C: Reattach the gas spring mounting plate to the seat assembly using the previously identified hardware. Page # 17 of 34 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Page 18
C-658 FH SCREW, 3/8”-16, 1” hardware. TRXL2-07PA800XBK LEFT ARM TRXL2-07PA900XBK RIGHT ARM C-754C WASHER, FLAT, 3/8” C1009 BH CAP SCREW M10*65 Page # 18 of 34 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Page 19
16 WT TOP PLATE below. C-417 HH SCREW, 1/4”-20, 2-1/2” TRXL2-07U500XBK UPRIGHT ASSY Secure the guide rods to the upright assembly using the identified hardware. Page # 19 of 34 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Page 21
LOCK NUT, 3/8”-16 B 900 PULLEY, 4-1/2” C-626 SH SCREW, 3/8”-16, 1-3/4” C-627 SH SCREW, 3/8”-16, 2” TRXL2-07CB000X WEIGHT STACK CABLE TRXL2-07CB500X PRESS ARMS CABLE Page # 21 of 34 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Page 22
C-754C WASHER, FLAT, 3/8” 9005BPD000XBK BACK PAD identified hardware. C-631 SH SCREW, 3/8”-16, 3” PAD-ST001-00XBK SEAT PAD C-1012 SH SCREW, 3/8”-16, 2-3/8” Page # 22 of 34 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Page 23
FRONT SHROUD upright assembly using the identified C-1003 M5 x 15 PHMS hardware. Note: Do not over tighten the screws securing the shroud in place. Page # 23 of 34 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Page 24
REAR SHROUD assembly using the identified hardware. C-1003 M5 x 15 PHMS FUS-00TC002BK REAR TOP CAP FUS-00TC001BK FRONT TOP CAP C-1004 PPMS M6 x 60 Page # 24 of 34 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Page 25
LBL-WS-FU250BK WT LABEL 250LB Note: Select the appropriate weight stack label based on your weight stack selection (standard 170 lbs. or optional 250 lbs.). Page # 25 of 34 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
The following items are critical to the safety of users and maintenance staff as well as ensuring the optimum performance of the machines. These inspections should be performed each day before the equipment is subject to use. TRUE Fitness is not responsible for performing or scheduling regular maintenance or inspections.
CAUTION: Do not use any acidic cleaners. Doing so will weaken the paint or powder coatings and may void the TRUE Fitness Warranty. Never pour or spray liquids on any part of the equipment. Allow the equipment to dry completely before using.
If any of these conditions are apparent, the machine should immediately be taken out of service and repaired. Be sure to use only cables supplied by TRUE Fitness. DO NOT use cables that have fittings attached with hand- crimp tools.
Page 29
Ensure that the snap-link opens and closes easily and is fully engaged when closed. Replace the snap-link as needed. Page # 29 of 34 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com Truefitness.com / 800.426.6570 / 636.272.7100...
HOURS OF OPERATION: 8:30 A.M. - 5:00 P.M. CST E-MAIL: service@truefitness.com CONTACTING SALES: Interested in TRUE products? Please contact us with any sales or product inquires so that we may direct you to the appropriate sales representative to answer your questions. TRUE FITNESS HOME OFFICE 865 HOFF ROAD ST.
Obvious damage to external packaging / internal product. Please refuse the shipment and it will be returned to TRUE Fitness by the carrier. Contact the TRUE Fitness customer support team by calling 800.883.8783 or sales support team by calling 800.426.6570 Monday-Friday during normal hours of operation to notify us that the shipment has been refused.
Frame: The frame is warranted for defects in material and workmanship for a 10 years. The frame is warranted for labor and freight (for parts shipped from TRUE) for one year from date of purchase. * This limited warranty on structural frame does not include paint or coatings.
Page 33
Product, this Limited Warranty will be void unless the written authorization The Fuse XL-0700 comes with one serial number on the base of of TRUE is first obtained). the machine. Please write down your serial number below and 5.
Page 34
If you prefer to mail your warranty card, have the owner of the product complete the information below and return it to TRUE Fitness within 30 days from the date of equipment installation.