Page 2
Технические характеристики, особенности и программного обеспечения могут быть изменены без предварительного уведомления. Для получения самой последней на сегодняшний день руководство по эксплуатации пожалуйста, посетите www.truefitness.com .Для документов на другие языки, пожалуйста, посетите www.truefitness.com/resources/document-library/ Page # 2 of 35 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Page 3
The proud manufacturing tradition of quality and the culture of innovation at TRUE have given rise to a full line of extraordinary cardio and strength equipment. As a result, people all over the world are benefiting from the TRUE experience.
9. If the machine appears damaged or inoperable, contact a facility staff member to place an “OUT OF ORDER, DO NOT USE” sign on the machine until it is repaired. Only use TRUE supplied replacement components to service this machine.
Page 6
3. Install this piece of equipment on a solid level surface that does not deviate more than 1/8” over a 10’ distance (or as defined and required by local building and architectural codes.) 4. TRUE strongly recommends that all equipment be anchored to the floor to prevent movement and increase stability.
Page 7
• Frames and Lifting Arms: Inspect weekly for integrity and function. Replace any component at first signs of wear. Use only TRUE supplied components. 4. Replace any warning label at the first sign of wear. Labels and the facility safety sign may be obtained from TRUE.
Page 8
Be sure all hardware is tight before using the machine. Retain these instructions for future reference. If you have any questions, do not hesitate to contact your TRUE dealer or TRUE Fitness Technology at (800)883-8783 or service@truefitness.com. Page # 8 of 35...
CLEAN: Guide rods and lubricate with a teflon lubricant if equipped. CLEAN: Upholstery LUBRICATE: Pivot bearings and linear bearings. REPLACE: Cables if equipped. Page # 9 of 35 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
• For standard 170 lb. stack it is 31 lb/ft (149 kg/m2) • For optional 250 lb. stack it is 37 lb/ft2 (181 kg/m Page # 10 of 35 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Phillips Head Screw Driver WORKOUT PLACARD: COMPLIANCES: This equipment complies with all fitness product standards. For a complete list of compliances, please visit www. TrueFitness.com. Page # 11 of 35 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
FUSE TOP CAP REAR PAD-ST001-00XBK SEAT PAD ASSY FUS-08PD001XBK FUSE 0800 CHEST PAD ASSY W/ FABRIC FUS-08PD002XBK ARM PAD ASSY W/ FABRIC FUS-00TP002BK ARM PAD PLASTIC BACKING Page # 13 of 35 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Page 14
FUSE 16 WT TOP PLATE ASSY TRXL2-08MF750XBK MAIN FRAME ASSEMBLY FUS-00GR001 SHORT GUIDE ROD TRXL2-08CB000X FUSE 0800 LONG CABLE 7XL2-0800HW FUSE 800 HARDWARE PACK Page # 14 of 35 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
11/16” x 3/32” machine is fully assembled. Note: Do not fully tighten main frame and upright assembly hardware until step 8 (Front and Rear Shrouds). Page # 15 of 35 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Page 16
Adjust the leveling feet to ensure the main frame assembly is equally parallel to the ground at any point. Page # 16 of 35 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Page 17
WASHER 3/8” I.D x 3/4” assembling. O.D X .065” THK C 749 LOCK WASHER 1/4” x 11/16” x 3/32” C 766A NYLON LOCKNUT 3/8”- 16 x 17/64” Page # 17 of 35 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Page 18
Note: Ensure the axle ends with the SD0092 ALUMINUM END CAP “D-shaped” indendations align with the 50*10.5*8 corresponding main frame assembly C 658 FHSCS 3/8-16 x 1 axle holes. Page # 18 of 35 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Page 19
FUSE 0800 SHORT CABLE Note: The pulley housing cable is shorter than the weight stack cable and should only be used as shown below. Page # 19 of 35 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Page 20
TRXL2-08CB001X FUSE 0800 SHORT CABLE Note: Ensure the pulley housing cable is seated in both pulley grooves before assembling the pulleys to the upper mainframe pulley assembly. Page # 20 of 35 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Page 21
1/4”-20 x 5/16” C-1005 M5 X 60mm PHMS Cable Bolt Top Plate Cable Nut 1” (25.4 mm) Maximum Page # 21 of 35 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Page 22
C1003 PPHMS M5 - 0.80 x 15 identified hardware. Note: Do not over tighten the screws securing the shrouds in place. Page # 22 of 35 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Page 23
FUS-00TC004BK FUSE UPRIGHT TOP CAP FUS-00MT001BK FUSE TOP CAP PAD C1002 PFHMS M5 - 0.7 x 16 C1004 PPHMS M6 - 0.75 x 60 Page # 23 of 35 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Page 24
WASHER 3/8” I.D x 3/4” O.D X .065” THK C 749 LOCK WASHER 1/4” x 11/16” x 3/32” C 987 BHCS 3/8”-16 x 1 1/4” Page # 24 of 35 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Page 25
WASHER 3/8” I.D x 3/4” O.D X .065” THK C 749 LOCK WASHER 1/4” x 11/16” x 3/32” C 630 BHCS 3/8”-16 x 2 3/4” Page # 25 of 35 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
Page 26
WASHER 3/8” I.D x 3/4” O.D X .065” THK C 749 LOCK WASHER 1/4” x 11/16” x 3/32” C 628 SHCS 3/8”-16 x 2 3/8” Page # 26 of 35 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com...
The following items are critical to the safety of users and maintenance staff as well as ensuring the optimum performance of the machines. These inspections should be performed each day before the equipment is subject to use. TRUE Fitness is not responsible for performing or scheduling regular maintenance or inspections.
CAUTION: Do not use any acidic cleaners. Doing so will weaken the paint or powder coatings and may void the TRUE Fitness Warranty. Never pour or spray liquids on any part of the equipment. Allow the equipment to dry completely before using.
If any of these conditions are apparent, the machine should immediately be taken out of service and repaired. Be sure to use only cables supplied by TRUE Fitness. DO NOT use cables that have fittings attached with hand- crimp tools.
Page 30
Ensure that the snap-link opens and closes easily and is fully engaged when closed. Replace the snap-link as needed. Page # 30 of 35 True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com Truefitness.com / 800.426.6570 / 636.272.7100...
HOURS OF OPERATION: 8:30 A.M. - 5:00 P.M. CST E-MAIL: service@truefitness.com CONTACTING SALES: Interested in TRUE products? Please contact us with any sales or product inquires so that we may direct you to the appropriate sales representative to answer your questions. TRUE FITNESS HOME OFFICE 865 HOFF ROAD ST.
Obvious damage to external packaging / internal product. Please refuse the shipment and it will be returned to TRUE Fitness by the carrier. Contact the TRUE Fitness customer support team by calling 800.883.8783 or sales support team by calling 800.426.6570 Monday-Friday during normal hours of operation to notify us that the shipment has been refused.
Page 33
Hours of operation 8:30am - 5:00 pm CST workmanship for a 10 years. The frame is warranted for labor and freight (for parts shipped from TRUE) for one year from date of purchase. * This limited warranty on structural frame does not include paint or coatings.
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. TRUE within 30 days of purchaser’s receipt of this Product. The serial number must be intact on the Product for this Limited Warranty to be valid.
Page 35
If you prefer to mail your warranty card, have the owner of the product complete the information below and return it to TRUE Fitness within 30 days from the date of equipment installation.