Setting Oven Controls - Frigidaire FGF345G Use & Care Manual

Gas range es100 control with gas sealed burners & broiler drawer

Hide thumbs

Table of Contents

To Change the Minute Timer while it is in use:

While the timer is active and shows in the display, press and hold the

To Cancel the Minute Timer before the set time has run out: Press

Changing the Temperature Display Mode (some models)

The electronic oven control temperature display mode was factory preset to display (Fahrenheit) °F oven tempertaures.

Note: Oven cooking temperatures may be set from 170°F to 550°F (77°C to 287°C).

To change the Temperature Display Mode to °C (Celsius) or from °C to °F (do not use Bake or Broil while changing

the Temperature Display Mode):

1. Press & hold the

show the current Temperature Display Mode whether set for

2. Press the

key pad once to choose the (Fahrenheit) °F mode; or press the

(Celsius) °C mode.

3. After 5 seconds, the display will flash. To accept the change, wait 5 more seconds until the oven control beeps once.

To complete the change skip step 4 below, OR;

4. If at any time during the process of changing the Temperature Display Mode

desired, press the

5. The control will beep once. The display will then return to the time of day with any temperature display mode change

you may have requested.

To Set or Change the Temperature for Baking

The oven can be programmed to bake at any temperature from 170°F to 500°F.

To Set the Controls for Baking:

1. Press

. "— — —°" appears in the display.

2. Within 5 seconds, press the

the temperature can then be adjusted in 5°F increments.

3. When the

temperature reaches the desired baking temperature, the control will beep once.

4. To cancel the baking function, press

To Change the Oven Temperature after Baking has Started:

1. Press

and make sure the bake temperature is displayed.

2. Press the

key pad for 6-8 seconds until

key pad before the oven control beeps once to cancel the process.