Audio Playback Modes - Canon MD130 Instruction Manual

Audio Playback Modes

Selecting the Audio Channel
You can select the audio channel to play
back when playing back a tape with audio
recorded on two channels (either stereo
sound or bilingual audio signals).
POINTS TO CHECK
Options
[ L/R]
Left and Right channels (stereo) / Main +
Sub signals (bilingual).
[ L/L]
Left channel only (stereo) / Main signal
only (bilingual).
[ R/R]
Right channel only (stereo) / Sub signal
only (bilingual).
FUNC.
( 22)
MENU
FUNC.
AUDIO SETUP
OUTPUT CH
Desired option
FUNC.
Selecting the Audio Track on a Tape with
Dubbed Audio
You can select the audio track to play
back when playing back a tape that has a
dubbed audio track (Stereo 2) in addition
to the original recorded audio (Stereo 1).
Audio Recording and Playback
POINTS TO CHECK
Options
[
Original sound only.
[
Dubbed audio only.
( 8)
[ MIX/FIXED]
Default value
Mixed audio with the original sound and
the dubbed audio at the same level.
[ MIX/VAR.]
Mixed audio where the balance between
the original sound (
audio (
FUNC.
( 22)
FUNC.
FUNC.
* When you select [
mix balance with the [MIX BALANCE] setting
( 39).
STEREO1]
STEREO2]
) and the dubbed
) can be adjusted.
MENU
AUDIO SETUP
12bit AUDIO
Desired option*
MIX/VAR.], adjust the
49
( 8)
Default value