Audio Playback Modes - Canon ZR800 Instruction Manual

Audio Recording and Playback
38
T
O USE AN EXTERNAL MICROPHONE
Connect the external microphone to the
MIC terminal. Use commercially available
condenser microphones with their own
power supply and a cable no longer than
3 m. You can connect almost any stereo
microphone with a
∅
audio recording levels may vary.

Audio Playback Modes

Selecting the Audio Channel
You can select the audio channel to play
back when playing back a tape with audio
recorded on two channels (either stereo
sound or bilingual audio signals).
POINTS TO CHECK
Options
[ L/R]
Left and Right channels (stereo) / Main +
Sub signals (bilingual).
[ L/L]
Left channel only (stereo) / Main signal
only (bilingual).
3.5 mm plug but the
( 9)
Default value
[ R/R]
Right channel only (stereo) / Sub signal
only (bilingual).
FUNC.
( 19)
MENU
FUNC.
AUDIO SETUP
OUTPUT CH
Desired option
FUNC.
Selecting the Audio Track on a Tape with
Dubbed Audio
You can select the audio track to play
back when playing back a tape that has a
dubbed audio track (Stereo 2) in addition
to the original recorded audio (Stereo 1).
POINTS TO CHECK
Options
[ STEREO1]
Original sound only.
[ STEREO2]
Dubbed audio only.
[ MIX/FIXED]
Mixed audio with the original sound and
the dubbed audio at the same level.
[ MIX/VAR.]
Mixed audio where the balance between
the original sound (
audio ( ) can be adjusted.
( 9)
Default value
) and the dubbed