Playing Back Still Images And Movie Clips From A Memory Card - Canon MD130 Instruction Manual

Playing Back Still Images and Movie
Clips from a Memory Card
1
Holding the lock button pressed
down, set the
PLAY.
2
Move the
/
(memory card).
T V S I
O IEW TILL MAGES
3
If the joystick guide does not appear
on screen, press (
4
Push the joystick (
between the images.
T P B M C
O LAY ACK OVIE
( 8)
switch to
switch to
) to display it.
) to move
LIPS
During
playback
5
Push the joystick (
to begin the playback.
• Push the joystick (
again to pause/resume the playback.
• Push the joystick (
pressed towards
rewind/fast forward the movie clip.
press and hold
REW
the wireless controller.
• Push the joystick (
stop the playback.
• When the movie playback ends or is
stopped, the first frame of the movie
appears as a still image.
IMPORTANT
Avoid the following actions while the card
access display
when the CARD access indicator is on or
flashing. Failing to do so may result in
permanent data loss.
- Do not open the memory card slot cover and
do not remove the memory card.
- Do not disconnect the power source or turn off
the camcorder.
- Do not change the position of the
switch or the operating mode.
The following may not be displayed correctly.
- Images not recorded with this camcorder.
- Images edited on or uploaded from a
computer (except for the sample images for the
Card Mix function (
- Images whose file names have been
changed.
Image Jump
You can jump ahead to a specific image
without having to browse all images one
by one. With movie clips, you can only
start the image jump in stop mode (when
the first frame appears as a still image).
Push the joystick (
pressed down. Release the joystick
when the image number gets to the
image you want to display.
Playback
33
) towards /
) towards /
) and hold it
or to
: You can also
or on
FF
) towards to
appears on screen, and
/
56)).
) and hold it