Preparing The Power Supply - Canon LU A 8S Instruction Manual

Preparing the Power Supply
Attaching theBartcry Pack
1. Turn the POWER switch to OFF.
2. Move the viewflnder upward.
3. Attach the battery pack to the
camcorder.
• Remove the terminal cover of the
battery pack.
• Press lightly and slide it in the direction
of the arrow until it clicks.
_w
Cba_ging the Battery Rack = _
.... _ "13
1. Connect the power cord to the _ ==
adapter.
2. Plug the power cord into a power
outlet.
3. Connect the power adapter to the
camcorder's DC IN terminal.
The CHARGE indicator starts flashing. It
glows steadily when charging is complete.
4. When charging is complete,
disconnect the power adapter
from the camcorder. Unplug the
power cord from the power outlet
and disconnect it from the
adapter.
5. Remove the battery pack after use.
Press the BATTERY RELEASE button to remove the battery.
13